2023 Crevalle 26 HCO

$119,900

Used

Boat in Gulf Shores, AL 36542 US

builtBuilt in 2023
Year the boat was built
model

26 HCO

Boat model
engine

1 Engine (Mercury)

Engine type and count
length

25.5 feet

Overall boat length
fuel

--

Fuel type
material

Fiberglass/Reinforced

Hull material
Nominal Length
25.5ft
Length Overall
25.5ft
Beam
8.5ft
Max Draft
1.17ft
Drive Up Draft
1ft
Deadrise At Transom
16deg
Dry Weight
4000lb
Max Passengers
9
Fuel Tanks
90gal
Hull Material
fiberglass
Hull Shape
modified-vee
Engine 1
Engine Make
Mercury
Total Power
350hp
Engine Hours
95
Engine Type
outboard
Hull and Deck
  • No wood construction
  • Epoxy coated fuel tanks
  • CRIMP- Crevalle Resin Infusion Manufacturing Process
  • 10 Year Transferable Hull Warranty
  • Black or white rub rail with Stainless Steel Insert
  • Composite Transom
  • Dedicated Anchor Locker
  • Position Control Hinges on all Hatches
  • Fiberglass Hatches Finished on both sides
  • NMMA Certified using ABYC Standards
  • Self Bailing cockpit
  • Forged Stainless Steel thru hulls with duckbill valves & ball valves
  • Standard 6” Engine Jack Plate combined with notched transom allows our boats to leap on plane in shallow water (Jack Plate all the way up) with no propeller cavitation.
  • Marelon Seacocks (Composite material, no corrosion or electrolysis)
  • Anti-Venturi thru-hull fittings (Allows pumps to operate at speed)
  • Hidden deck drains with stainless covers and duckbill valves
  • Welded one-piece stern eyes
  • Deep cockpit for a safe dry ride
  • Yacht Grip, non-skid deck
  • Setback transom provides full aft deck
  • Under gunwale rod storage for (3) 8′ rods each side
  • Forward lockable rod storage with room for (10) 7′-6″ rods 
  • 40″ wide flip-up aft seat on centerline for safety
  • Bow Dry storage
  • One removable 65-quart & one 72-quart coolers
  • (6) Custom Crevalle pull-up cleats
  • (8) Standard cup holders 
  • Port and Starboard in-gunwale safety gear storage
  • 12″ Multifunction display
  • Floor storage for 5 Gallon Bucket
  • Custom fiberglass leaning post with backrest, rigging tray, tackle storage, sink, glove boxes, removable cooler, cup holders & rod holders
  • Unobstructed aft fishing deck
  • Pre wired 8 AWG wiring for trolling motor
  • Trolling motor plug panel
  • Forward grab rails
  •  Automatic/manual bilge pump
  • Bilge pump & high water bilge pump
  • Fresh Water Transom Shower
  • Fuel Water separator
  • Wet Sounds Speakers
  • Trim Tabs -Lenco with LED indicators
Release Wells (2)
  • Insulated 28 Gallon aft release wells
  • Venturi aeration bubbler
  • Dual jets
  • Protected overflow stand pipe
  • Commercial aquarium type aeration
  • Blue gel coat
  • 800 gph, aeration pumps
  • LED lighting
  • Intake plumbing that prevents water levels from dropping while at speed
Bait Well (1)
  • Adjustable aeration jet can be closed to convert bait well into fully insulated cooler
  • Wide opening for cast net use
  • Side mounted overflow fitting with removable filter dome means no stand pipe to get in the way of netting bait
  • Blue gel coat
  • Gasketed live well lids
Helm
  • Your choice colored gelcoat helm face to eliminate secondary glare
  • Single 12″ Multifunction display with console storage box or optional, second 12″ display
  • Deluxe stainless steering wheel with power knob
  • Integrated, dual height, nonskid foot rests
  • Welded 316 stainless steel console grab rail
  • Compass
  • Dual Note Stainless Horn
  • Engine data on the multifunction display (No gauges)
  • Portside helm door
  • Backlit switch lables
  • Console door with trash bag holder
  • Individual circuit breakers
  • LED lighting inside storage and bilge
  • Black Box Bluetooth ready stereo
  • Integrated engine data on electronics options
  • Hydraulic or electronic steering with tilt helm
  • Helm panel with ring lit switches and backlit function labels
Technical Standards
  • Tinned copper wiring
  • LED cockpit lighting throughout, blue or white selectable
  • Deutsch water resistant plugs on harnesses
  • Sealed Bussbars
  • Heat shrink electrical terminals
  • Circuit breakers (not fuses)
  • 8 AWG trolling motor harness
  • Helm mounted dual battery switch
  • LED Navigation lights
  • Deluxe battery hold down trays
Upholstery
  • Custom upholstery with contoured seating and cushions
  • Tone on tone color accents, top stitching, heat reflective vinyl, and multi-density foam provide maximum endurance and comfort
  • Contoured forward helm seating and leaning post cushions
Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Price History

DateEventPrice
11/5/25Price decreased$119,900(-4.0%)
9/23/25Price decreased$124,900(-3.8%)
9/5/25Price decreased$129,900(-3.7%)
8/2/25Price decreased$134,900(-3.6%)
6/28/25No change$149,900
6/26/25Price decreased$139,900(-6.7%)

Videos from Gulf Shores Power Sports and Marine on this 2023 Crevalle 26 HCO

Contact Gulf Shores Power Sports and Marine

3807 Gulf Shores Pkwy., Gulf Shores, AL, 36542

Be the first to know when similar boats hit the market

Get notified when new boats become available

Meet the Broker

Address

3807 Gulf Shores Pkwy.
Gulf Shores, AL 36542

Boat Location

Be the First to Know

Get notified when new boats become available.