• Builder - Corsair Marine, Chula Vista, CA
• Designer - Ian Farrier

LOA:  28' 5"  (8.66 m)
LWL:  26' 3"  (8.0 m)
Beam (open):  19' 9"  (6.1 m)
Beam (folded):  8' 2.5"  (2.5 m)
Draft (hull):  1' 2"  (0.36 m)
Draft (board down):  4' 11"  (1.5 m)
Weight (empty):  2690 lbs  (1224 kg)
Mast Length:  38' 4"  (11.68 m)
Bridge Clearance:  43' 10"  (13.05 m)

Sail Areas:
Mainsail - 300 sq ft  (29.0 sq m)
Jib - 175 sq ft  (16.3 sq m)
Screacher - 358 sq ft  (33.3 sq m)
Spinnaker - 780 sq ft  (72.5 sq m)

• 2025 Tohatsu 9.8HP EFI electric start outboard, with separate starting battery.

• Sleeps 4, 2 in the v-berth, and 2 in the main cabin.
• There is space for a porta potti next to the daggerboard trunk on the starboard side.

• The galley counter is located to port as you enter the main cabin.
• A sink with drain (no water tank) has been installed in this boat.
• For cruising or overnight races, just bring along a stove, jugs of water and a plastic dishpan for washing up. Of course, a permanent stove and water tank could be installed if desired.
• Gimbaled Jet Boil camping stove

• B&G Zeus chartplotter.
• Standard Horizon VHF
• Pelagic tiller pilot mounted on port bulkhead.
• Raymarine electronic compass mounted on pop-top
• Analog compass mounted on the starboard bulkhead.

• 100 amp-hour LiFePo battery with Bluetooth
• (Two) 50-watt solar panels
• (Two) Rich Solar 20Amp MPPT solar charge controllers
• Perko battery switch
• Circuit breaker panel
• 1 interior cabin light over the galley counter (converted to LED)
• Navigation lights (converted to LED)
• Deck / Steaming light (converted to LED)

• Main: 2022 Fries Sail Design GPL Lite Skin in excellent condition, two reefing points.. 
• Jib: 2023 FSD GPL Lite Skin with internal halyard and zipper luff, on Colligo furler with torsion line forestay.
• Screacher: 2023 FSD Triradial, CS10 Black, on Colligo furler. 
• Spinnaker: 2023 FSD spinnaker, Tri radial SK90/75, Blue/Gold.

Additional sails:
• Calvert Masthead spinnaker, 2020, good condition.
• Calvert Masthead furling Code 0, good condition, uses the screacher furler.
• ATN storm jib, never used.

• Carbon fiber mast (Omohundro) with Harken track and Battcars
• Carbon fiber boom from Competition Composites
• Carbon fiber bow sprit
• Carbon tiller and Carbon forward tiller-steering station from CCI
• Farrier Marine custom carbon tiller, rudder and rudder cassette
• Custom sliding companionway hatch (instead of the standard pop-top)
• Mast has an extra sheave added for the masthead spinnaker and Code 0
• Windward sheeting traveler car
• 8:1 mainsheet
• 3 Harken 40ST winches on the cabin top
• 1 Karver 4 speed winch on the cabin top for spinnaker/Code 0
• 2 Harken 40 winches on the cockpit coaming
• Positive mast rotation controls
• Cunningham block and tackle
• Barber hauls

• NO interior carpet liner - carpet was removed and the interior painted white
• NO cushions
• Red Sunrise nets (2023)
• Mainsail cover (Red) with integrated lazy jacks
• Manual bilge pump
• 
• Light weight aluminum Danforth style anchor w/ rode
• Tiller extension
• Boarding ladder
• Fire extinguisher
• Docklines / Fenders
• Pettit Black Widow bottom paint

• Pacific Trailer tandem axle galvanized steel trailer
• No brakes, no fenders

The Multihull Source offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.