2025 Catamaran Dual Flyer 400

The Dual Flyer 400 Performance Cruiser is Built to order, and the handover takes place at the factory in Knysna South Africa. If you were to ship delivery would be at Port Everglades Ft Lauderdale, FL USA for handover.

DUAL FLYER 400

Using the latest technologies and build methods such as resin-infused core construction with epoxy resin, carbon used in high load areas. The option of fixed keels or a curved asymmetric dagger board. Option of four-stroke outboards or inboard Sail drives.

LIVE ABOARD GENERAL SPECIFICATIONS

HULL, DECK AND BULKHEADS

1. Epoxy Resin-Infused, Core Construction with Carbon in High Load Areas.

2. Curved Asymmetrical Dagger Boards. (Optional: fixed keels).

3. Fixed Rudders

DECK SALOON

1. U Shaped Saloon Unit with Cushions and Table.

2. Galley with Fridge Freezer, Induction Stove and Sink.

3. Forward Access to Trampoline Section.

4. Drop Down Window and 2 Doors Opening Onto the Aft Deck.

5. Steering on Starboard Side with Instrument Panel, Engine Controls.

6. Fixed Davits.

FORE DECK

Windlass in Compression Post with Anchor Storage.

2. 2 x Super Tramp Trampolines.

3. Seating Cushions.

4. Access Hatch from Saloon.

5. 2 x Lewmar Hatches into Forward Storage.

PORT HULL (Owners Hull)

1.Double Bunk with Mattress

2. All Storage Cabinets Built with Foam Core with Wood Veneered Doors.

3. Electric Head.

4. Vanity with Wash Basin (Corian Top)

5. Hot and Cold Shower.

6. Office with Desk and Storage.

7. 3 Portlights.

STARBOARD HULL

1.Double Bunk with Mattress.

2. Single Bunk with Mattress in Crossbeam.

3. All Storage Cabinets Built with Foam Core and Wood Veneered Doors.

4. Electric Head.

5. Vanity with Wash Basin. (Corian Top)

6. Hot and Cold Shower.

7. 2 x Portlights.

DECK HARDWARE

1.2 X Lewmar Hatches.

2. 5 x Portlights.

3. 4 x Aluminium Mooring Cleats.

4. 6 x Stantions.

5. 5 x Winches.

6. Jib Traveller

7. Main Sheet Traveler or Bridle System.

8. 10 x Rope Clutches. (Spinlock).

9. All Necessary Blocks and Halyards Supplied.

SAILING INSTRUMENTS

1.1 X Raymarine/Depth, Speed and Wind

2. 1 x Raymarine 9 inch Chartplotter.

3. 1 x Raymarine Autohelm.

4. 1 x VHF with Built in DSC.

5. 1 x Compass.

PLUMBING

1.2 X Johnson Manual Bilge Pumps.

2. 4 x Remotely Mounted Bilge Pumps.

3. 2 x Bilge Pumps for Engine Room.

4. 4 x Rule Float Switches.

5. 2 x Hot and Cold Faucets for Heads.

6. 1 x Hot and Cold Faucet for Galley.

7. 400L Water Tank.

8. 400L Fuel Tank.

9. 2 x Electric Toilets.

10. 1 x 31L Hot Water Cylinder.

ANCHOR AND RIGGING

1.15kg Rocknear Anchor with 30m of 8mm Chain and 70m of 18mm Warp.

2. Mooring Warps and 4 x Fenders (250 x 800mm).

MAST

1.Doube Diamond Aluminium Anodized Mast with Stainless Steel Rigging.

BOOM

1.Aluminium Anodized with Reef Line Jammers and Hay Racks.

FORWARD CROSSBEAM

1.Aluminium Anodized Section with Seagull Striker.

SAILS

1.Main 60 sqm Crosscut Dacron Full Batton with Stack Pack.

2. Jib 31,6 sqm Crosscut Dacron Full Batton with Soft Hanks. (Furler optional).

3. Code 0 86 sqm. (Furler Optional).

ENGINES

1.3 x 19 HP Yanmar Inboards with Saildrives and Folding Props.

ELECTRIC

1.1 x Marine CD/Radio Player (Fusion).

2. 4 x Waterproof Speakers. (Fusion).

3. Switch Panel.

4. 2 x Engine Starter Batteries.

5. 4 x House Bank Batteries.

6. 4 x 180 Watt Solar Panels Mounted on Roof.