1985 Bristol Channel Cutter 28

$45,900

Used

Boat in Port Townsend, WA 98368 US

builtBuilt in 1985
Year the boat was built
model

28

Boat model
engine

1 Engine (Volvo Penta)

Engine type and count
length

35 feet

Overall boat length
fuel

Diesel

Fuel type
material

Fiberglass/Reinforced

Hull material
Nominal Length
35ft
Length Overall
37ft
Beam
10ft
Cabin Headroom
6.08ft
Heads
1
Fresh Water Tanks
70gal
Fuel Tanks
27gal
Holding Tanks
10gal
Hull Material
fiberglass
Engine 1
Engine Make
Volvo Penta
Total Power
23hp
Engine Hours
2122
Engine Type
inboard
Fuel Type
diesel
Engine Year
1985
Drive Type
direct
Propeller Type
3-blade
Propeller Material
bronze
Accommodations and Layout

Sleeping arrangements amidships, head forward. Sleeping arrangements under way are on port and starboard settees with lee cloths and port and starboard pilot berths aft. The amidships settees can be combined for a queen-sized bed for “in-port” accommodations. Forward of main stateroom is forecastle with work bench to starboard, hanging locker/bin to port and composting head center.  Generous chain locker and line locker (open) forward. 

Headroom 6'1".


Galley

Galley is directly below companionway 
Icebox and sink to starboard 
Gimbaled propane stove/oven to port 
Safety rails on both sides 
Propane tank mounted on outside deck 

Electronics and Navigation


 Autohelm autopilot 

Garmin GPS
4-inch Plastimo compass 
Autohelm ST50 depth sounder, wind speed indicator and speed/distance log 
Icom 718 all-band 2-100/watt SSB 
Uniden VHF radio 
Stereo /CD player 
Clock and Barometer 
All manuals and associated books 
Life ring 
Life sling 
406 EPIRB


Electrical System

 12V DC and 110V AC systems 
 2 batteries 
 Battery parallel switch 
 20-amp automatic battery charger 
 Shore power cord 
 2 solar panels (Solaris 5M/60M); 40-watt each at 2.2AH 


Deck

Teak decks need work
Dinghy with 3.5hp Mercury 
35# CQR anchor; 225-feet 5/16-inch chain 
45# Danforth-type anchor; 200-feet ½-inch nylon with chain leader 
25# Danforth anchor 
65# bronze 3-piece Herreshoff anchor 
Bow pulpit, rails, lifelines and side stanchions 


Hull

 Built by Channel Cutter Yachts, Vanvouver, BC
 Full keel with outboard rudder 
 Hull is white with green trim 
 Copper foil (3M) applied to bottom 
 Pilothouse can be unbolted and removed 


Sails and Rigging

Manual boom vang 
Elliott Pattison tanbark sails 
Mainsail, jib, spinnaker, #1 genoa, staysail, new storm trysail, blooper and drifter 
Profurl roller furling on both headsails 
S/S wire standing rigging 
Self-tailing bronze Barient winches 
Keel-stepped aluminum mast 
Spinnaker pole 
Whisker pole 

Engine and Mechanical

2 automatic and 2 manual bilge pumps 
Manual fire extinguishing
Range 200-nm 
Fuel filters 
Fresh water cooling 
Stove and engine fuel shut-off valves 
Diesel heater 
2 extra propellers 
Tiller steering 
2.4:1 transmission ratio
2 35-gallon water tanks 
Electric water heater


Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Price History

DateEventPrice
1/28/26Price decreased$45,900(-8.0%)
1/5/26Price decreased$49,900(-16.7%)
12/4/25Initial price$59,900

Contact SEA Marine

419 Jackson Street, Port Townsend, WA, 98368

Be the first to know when similar boats hit the market

Get notified when new boats become available

Meet the Broker

Address

419 Jackson Street
Port Townsend, WA 98368

Boat Location

Be the First to Know

Get notified when new boats become available.