2006 Beneteau Oceanis Clipper 423

I : 49.54 ft

J : 16.54 ft

P : 43.44 ft

E : 14.83 ft

Working Sail Area : 915.58 sq ft

- YACHT CLUB PACK -

• Stainless steel hoops sprayhood in Captain Blue, or bimini.
• H40.2STC starboard winch in place of H32.2STC.
• H40.2STCEH electric winch to port in place of H32.2STC.
• Hot and cold cockpit shower.
• Waterproof cockpit speakers.
• Teak cockpit floor.
• Ground tackle: 20 Kg Danforth anchor with 32 m chain and 48 m warp.
• Mooring: 4 mooring lines and 6 fenders.
• 10 place crockery set.

- PERFORMANCE PACK -

• Extended mast (+70cm) with track and cars.
• Fully battened performance mainsail.
• Foam-luffed jib with anti-UV strip.
• H48.2STC genoa sheet winches in place of the H46.2STC winches.
• 3-blade folding propeller.

- F1 ELECTRONICS PACK -

• In the cockpit: Raymarine ST60 Speedo/depth sounder, Raymarine ST60 windvane anemometer, and Raymarine ST6001+LS40 autopilot.
• On steering wheel console: multifunction GPS screen, plotter, Raymarine C80LCD colour chart reader 8.4?? compatible with Navionics Gold cartography (without charts).

- ELECTRONICS OPTIONS NOT INCLUDED IN PACK -

• Raymarine Smart Controller remote control for autopilot.
• PC Interface.
• Raymarine compass and gyro sensor.
• Raymarine 54 E VHF.

- OTHER OPTIONS AVAILABLE -

• Steel blue hull.
• Teak deck, teak cockpit.
• Spinnaker pole.
• Symmetric/asymmetric spinnaker gear.
• U-bolt for releasable staysail forestay + tack position.
• In-mast furling.
• Electric genoa sheet winches.
• Coachroof sprayhood, bimini, sun canopy.
• Steering wheel console /wood table cover.
• Cockpit cushion.
• Bow thruster.
• Freshwater foot pump.
• Electric WC pump.
• Supplementary WC rigid holding tank.
• Hob/oven with grill.
• 12 V refrigerator compressor.
• Heating.
• 4th battery + power distributor.
• Windlass control in cockpit.
• Supplementary battery charger.
• Supplementary ports.
• Laminated soles.
• Double berth in saloon.
• Windex windvane.

• Teak slatted pivoting helm seat for easy access to scoop transom (Bénéteau patent).
• The cockpit is fitted with five lockers:
• 2 side lockers with teak slatted lids.
• 2 aft lockers with teak slatted lids.
• 1 separate gas locker.
• All cockpit bench seats are teak slatted.
• The leather-trimmed steering wheel is pivoting for easier movement around the cockpit.
• Engine control lever.
• Steering compass.
• Console for navigation instruments.
• Handrail.
• Cup holder.
• 12 Volt socket.
• Oddments locker with stainless steel protection on the front of the console.
• The cockpit table is teak with removable leaves. The table support is stainless steel with a footrest.
• The engine control panel is built in to the port coaming with a PMMA protective cover.
• Manual bilge pump.
• Overhead lamp.
• Cold water shower.
• 2 loudspeakers.

• 2,3 and 4 cabin versions are available.

Electrical panel:

• 16-switch 12 V electrical panel plus 4 x 220 V breakers, back-lit by blue indicator lights.
• Cigarette lighter socket.
• Double protection to electrical panel, differential and bi-polar thermal circuit breakers for 220 V and 12 V thermal circuit breakers.

Supply:

• The 12V electrical circuit is supplied by
• Two 140 Amp service batteries.
• One 110 Amp engine battery.

Resource management indicators:

• Voltmeter.
• Ammeter.
• Electric fuel tank gauge on engine control panel.
• Electric water gauges.

Battery charging:

• By 220 V shore supply with 20 Amp battery charger.
• Alternator coupled to engine.
• By 220 V sockets in cabins.

Lights:

• Approved navigation lights.
• Bow and stern navigation lights.
• Steaming light (masthead light).
• Anchor light.

• Headroom: 2 m.
• A functional space:
• Work surface over icebox and around sink.
• Gimballed stainless steel two-burner hob and oven, with safety rail.
• 175 L GRP ice box with refrigerating unit and front opening.
• Seawater foot pump and icebox drainage.
• Waste bin under sink.
• Cutlery drawer.
• Shelving.
• Stainless steel bottle rack.
• Stowage under hob with hinged doors
• Stainless steel sink unit with double rectangular sinks.
• Mixer tap with hot and cold pressurised water.
• Two Lewmar opening ports (583 mm x 123 mm) with curtains.
• Opening hatch (272 mm x 417 mm).
• Two halogen deckhead lights.
• One neon light.

• Engine compartment with foam sound-proofing.
• Engine control panel with rev. counter and alarms on port cockpit coaming.
• Stainless steel propeller shaft with GRP protection moulded into the hull.
• Fixed three- blade propeller.
• Engine mounting built into the inner mould.
• Rotomoulded 200 L diesel tank, fitted with electronic gauge.
• Saltwater and diesel filters with separators.

• The hull is single-skinned GRP construction.
• Reinforced points (keel, rudder, chain plates, hull-deck joint) help to strengthen the structure.
• A structural inner moulding is bonded and laminated to the hull. Its structural role is important as it takes and absorbs the stresses at pressure points (shroud chainplate tie rods, keel, rudder, etc.), and spreads any loads guaranteeing reduced strain on the hull.
• The surface of the inner moulding makes cleaning easier and provides a better finish.
• The standard hull is white with blue and silver livery. Steel blue is available as an option.

• The deck is sandwich construction (glass fibre and balsa) for an optimal strength/weight ratio and excellent thermal and sound insulation.
• A ?gdiamond point?h non-slip surface increases safety over all areas of movement on deck.

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.