INTERIOR 

• Alpi Blond Oak interior wood
• Parquet type laminated floors
• Fabric lined hull in main saloon and forecabin
• Wood slats under mattresses in both berths
• Ample storage throughout

FORWARD CABIN

Headroom: 6’5’’

• Double access door
• Central double bed (4’11’’ x 6’10’’ x 3’7’’)
• 1 Hanging locker (To starboard)
• 1 Cupboard with shelves (To port)
• Valet tray - Open shelving - Drawer under the bed
• 1 Opening deck hatch with mosquito blind
• 2 Hull portholes with curtain
• 4 Reading lights

PORT AFT CABIN

Headroom: 6’1’’

• Dimensions - Berth : 5’5’’ x 7’2’’ x 6’9’’
• 1 Hanging locker
• 2 Reading lights
• 1 Overhead light
• Open shelving
• Deck house opening porthole

AFT STARBOARD HEAD AND SEPARATE SHOWER ROOM COMPARTMENTS
Headroom: 6’2’’

• Access through saloon
• 1 Basin, 1 Mixing tap hot/cold water, Shower
• Quiet flush electric toilet (fresh water)
• Head cabinet, 1 Mirror, Toilet accessories, Peg
• 1 Overhead light
• 1 Opening portlight with curtains in side windows in the coaming
• Separate shower in an adjacent room with its own privacy door

MAIN SALOON

• Full hull width saloon
• Bench seat on port and starboard sides
• Large saloon table with 2 leaves and bottle rack
• Retractable chart table on starboard side
• Starboard bench seat has an extension cushion for use as a berth
• LED TV on articulated wall mount for ease of viewing in the forward berth and main saloon

L-SHAPED GALLEY ON PORT SIDE

• 26 Gal cool box
• Microwave
• LPG 2-burner stove with oven and custom cutting board
• Plenty of storage above and below countertops
• Single stainless steel sink

B&G Electronics

• 4G Radar
• Additional B&G chart plotter at starboard helm
• Additional B&G Triton display at port helm
• Added USB charging outlet to port helm
• B&G AC42 autopilot + Control at steering station
• B&G V50 VHF, AIS receiver function
• AIS 400
• ForwardScan Sensor (Forward underwater vision)

• 12 V circuit
• Victron deep cycle AGM batteries for engine start, house, and bow thruster (2025)
• Victron Smart Battery Monitor (2025)
• Victron MPPT controllers for solar panels (2025)
• Inverter
• Mast-mounted deck light
• Galvanic Isolator
• Black water holding tank sensor
• Mast mounted TV antenna/receiver
• 4 fans, 2 in each cabin
• 1 Power distributor
• 12 V electrical panel
• 1 12 V Socket
• LED navigation lights: 1 Navigation light - 1 Engine navigation light - 1 Anchor light on masthead
• Wire runs for optional cables
• 120V AC circuit, 2 30-Amp shore power inlets, 1 for house, 1 for air conditioners
• 2 Air conditioning units

• Engine Yanmar Diesel 30 hp / 30 HP Sail Drive
• Engine control - Control panel in cockpit
• Engine compartment: Soundproofing foam - Ventilation: 2 Air intakes and 1 powered air expulsion
• 1 Alternator - 12 V / 125 Ah
• 1 Rotomoulded diesel tank 34 US Gal - Gauge at the chart table - 1 Deck filler
• Filters: Sea water - Diesel - Water separator
• Fixed three bladed propeller
• 1 Engine access through companionway - 3 access to engine by the sides of the companionway

• 1 Fuel Tank, 34 gallons
• 2 Water Tanks, 1 aft, 34 gallons, 1 extra forward, 20 gallons
• 1 Holding Tank, 21 gallons
• 1 Hot Water Tank, 7 gallons
• Gas cylinder locker - starboard aft cockpit (10’’ x 1’’ x 15’’) - Regulator and safety tap

• 1 rotomoulded freshwater tank (130 L / 34 US Gal)
• 1 Deck filler
• Water unit
• 1 Rigid 80 L / 21 US Gal black water holding tank for each WC
• Electric pump & Shower draining
• 1 Electric bilge pump & 1 Manual bilge pump
• Water heater (25 L / 7 US Gal) - engine start (220 V)

SPECIAL FEATURES

• Full custom screen cockpit enclosure (2025)
• Bimini/Dodger/Connector (2025)
• Custom wheel covers (2025)
• Cockpit seat cushions
• Varnished teak fold down leaf cockpit table
• Cockpit fixed portholes for the aft cabin
• Cockpit opening porthole for aft cabin
• Bow thruster
• Windlass control in cockpit with chain counter (fixed)
• Shore freshwater supply
• Outboard engine 
• Complete mooring kit
• Solar Panels (2024)
• Upgraded anchor to Ultra stainless steel anchor

MOORING LINES - MOORING

• Self-bailing chain locker - Clench bolt - Hatch cover
• Single stem roller
• 6 Aluminium mooring cleats - Stainless steel deck line protection

SAFETY ON DECK

• 1 Open stainless steel forward pulpit, 2 Stainless steel pushpits
• 1 Lifebuoys support bracket
• Double guardrail and stainless steel stanchions
• Openings in guardrail to port and starboard
• Ring for flag welded on pushpit

COCKPIT

• Self-draining cockpit
• 1 Cockpit locker
• 2 Lockers in cockpit bottom - Side helm's seats
• 1 Liferaft locker - aft cockipt (3’1’’ x 1’11’’ x 1’2’’)
• Natural solid wood slatted cockpit benches (5’7’’ x 1’8’’)
• 2 Steering wheel consoles: Stainless steel steering wheels - 2’7’’ - Leather covered - Steering gear at the helm station - metal cable transmission system - Stainless steel handrail - navigation instrument support - Cup holders
• 2 Steering compass
• 2 Deck access points to tiller system
• 1 Emergency tiller
• Portside engine control and control panel
• 2 Hinged PMMA companionway doors - Sliding hatch made of PMMA
• 1 Swimming ladder

SWIM DECK / STERN DECK (Exclusive Trim level)

• Fully opening transom, convertible to bathing platform (8’6’’ x 2’4’’)
• Gas strut opening (manual), 1 Stainless steel integrated telescopic swimming ladder

SAILS

• In-mast furling mainsail
• Self-tacking Jib with UV protective strip
• Code 0 Sail with Harken roller furler

RIGGING

• Standard mast 9/10 anodized aluminium installed on the deck, 2 aft-swept spreaders
• Anodised aluminium boom
• Discontinuous stainless steel standing rigging
• 1 Backstay
• Rigid boom vang with tackle
• Genoa furling system with drum on the deck
• 2 Genoa tracks with piston adjusted traveller cars
• 2 Genoa sheet return stainless steel fairleads
• Mainsheet attaches to arch over cockpit
• Rigging run back to cockpit (except boom topping lift)
• Spare halyard
• Flag halyards
• Complete running rigging: Main halyard, genoa halyard with clutch on mast and cleat, Boom topping lift with cleat on mast, Mainsheet, 2 Genoa sheets, 2 Automatic reefing system
• 4 clutches, 4 Jamming cleats

WINCHES

• 2 Self-tailing genoa sheet winches (H40.2 STA)
• 1 Coach roof winch self tailing (H35.2 STA)
• 1 Aluminium "Speed Grip" winch handle, 1 Winch handle box

• Built at the Beneteau Factory in Marion, SC, USA
• Design in accordance with European Directive requirements and according to CE certification
• Monolithic hull design in polyester
• Monolithic structural inner moulding bonded to the hull
• Deck injection constructed in glass fibre and Saerform foam sandwich, covered with "diamond-point" non-slip coating
• Hull-deck join screwed, bonded and trimmed with 1 bulwark
• Cast iron keel fixed with bolts and stainless steel backing plates
• Underhung rudder with stainless steel stock
• White colored hull - Grey metal hull graphics

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.