2027 American Tug 362
Price on request
Boat in La Conner, WA 98257 US
Built in 2027
362
1 Engine (Volvo )
36 feet
Diesel
Fiberglass/Reinforced
Loaded American Tug 362 - order yours today!
NEW GALLEY AND "L" SETTEE SALON LAYOUT
The American Tug 362 is a best-in-class two-cabin trawler built to handle unpredictable waters with comfort and ease. Based on our AT 365 deck and hull, the 362 draws upon its commercial fishing heritage to deliver excellent seakeeping performance whether you're venturing from California to Alaska, touring the Great Lakes, tackling the Great Loop, or cruising the Bahamas.
Designed to offer comfortable touring for more than one couple, the 362 features a two-stateroom, single head layout which, together with the convertible settee in the salon, provides sleeping accommodations for up to six people. The 362 pilothouse has been redesigned to feature a LLEBROC helm chair, and comfortable seating for two to port. The salon features an L-shaped galley with solid surface counter tops, dual sinks and plenty of storage offset by an L-shaped settee to starboard with generous amounts of seating.
Standard equipment includes generator, bow and stern thrusters, solar panel, full aft overhang, stern davit and a 320hp Volvo D-4 engine. Choose between diesel heat or air conditioning with reverse cycle heat, propane stove and oven or electric stove and oven.
Handcrafted in the USA.
+ LeBroc Captains chair, swivel and slide with armrests
+ Sapele overhead console
+ Intermittent windshield wipers with self-park and washing system
+ Lighted compass
+ Four hand grab rails, two each forward and aft of pilot house doors
+ LED lights throughout overhead
+ Defrost fan on console
+ 12v and 110v outlets
+ Stereo system with AM/FM/Bluetooth
+ Two stereo speakers
+ Four opening windows and screens
+ Sliding pilothouse doors with windows and screens
+ Large console with electronics
+ Hatch allowing access to engine room
+ Settee converts to double bed with storage under
+ Salon table
+ Pleated day/night shades
+ Three opening windows with screens
+ Hatch allowing access to tank room
+ Propane, two burner stove / oven or electric, two burner stove / oven
+ 7.3 cubic feet refrigerator freezer
+ Microwave oven
+ Hard Surface countertop with stainless sink
+ Multiple 110v outlets
+ Drawers and storage cabinets
+ Cutting board custom fit to sink
- Center island queen berth, lifts for storage below
- Cedar lined hanging locker to starboard and port
- Reading lights at head of berth
- Three-way switching for overhead lights
- Two round stainless steel ports with screens
- 110v outlet and USB outlets
- Ocean Air Sky Screen for Bomar hatch
- Double berth (76” x 45”)
- Hanging locker and 2-drawer dresser
- Reading lights at head of berth
- One round stainless-steel port with screen
- 110v outlet and USB plug
- Fresh water 12v toilet
- Vanity with storage and stainless sink
- Large fiberglass stall shower
- One round stainless-steel port with screen
- Sapele paneling in pilothouse
- Sapele valances in salon and pilothouse
- Cabinets trimmed in solid Sapele
- Overhead and walls in marine grade vinyl with foam backing
- High quality snap-in carpeting
- 1000w electric heater in salon
- Diesel hydronic furnace for cold weather deliveries
- Air-conditioning with reverse cycle heat for warm weather deliveries
+ 5kw Northern Lights generator
+ Side-power 6hp twin prop bow thruster with joystick control
+ Side-power 4hp twin prop stern thruster with joystick control
+ Side-power remote control (bow and stern thrusters)
+ Solar panel
+ Stainless steel prop shaft with dripless shaft seal
+ 4 blade propeller CNC-machined to class “S”
+ Composite rudder and skeg
+ Wet/underwater exhaust
+ Seawater strainer
+ Racor filter for main engine
+ Racor filter for genset
+ Automatic water pressure system
+ Sound deadening in engine and tank room
+ Three 2000gph bilge pumps with automatic float switches
+ Waste discharge system with macerator
+ Electronic shift and throttle system
- Remotely controlled battery switching
- AC/DC Distribution panel with back lighting
- Battery combiner system for charging
- Inverter / Charger (2000W)
- Three 4-D AGM batteries for house (600amp hours)
- One 4-D AGM battery for main engine start
- 30amp shore power service with power cord
- Electric horn
- International navigation lights LED type
- 12v LED courtesy lights throughout boat
- 12v LED overhead lighting throughout boat
- Stainless Edson helm wheel
- Autopilot valve system installed
- SeaStar Hydraulic pump and cylinder
- Integral rudder port with bearing and dripless seal
- Tank monitoring system for all tanks
- 120 gallons water in FDA approved poly tanks
- 11 gallon water heater
- Taste/odor filter for galley fresh water
- 45 gallon waste tank
- Two aluminum fuel tanks (230 gallons total) each with sight glass and valves
+ 316 Stainless steel two arm transom davit
+ 1-1/2” waste and water fittings
+ 2” fuel fills
+ 316 stainless steel 1-1/4” bow rails with stainless steel burgee staff
+ 316 stainless steel 1-1/4” sundeck rails and ladder
+ 316 stainless steel bow roller assembly
+ Bomar hatch in trunk cabin
+ Color matched powder coated aluminum framed and sliding or hinged doors
+ Access hatch to lazarette in cockpit
+ Seawater Washdown system in bow and cockpit
+ Swim Platform with stainless steel edge guard
+ Transom door
+ Six stainless steel fender cleats
+ Molded non-skid walking surfaces
+ Molded fiberglass mast
+ Propane locker in cockpit
+ Molded fiberglass deck box on bow
+ Full overhang over cockpit with ladder and hatch to upper deck
+ Generator spare parts kit
+ Main engine spare parts kit
+ Two portable fire extinguishers
+ Four fenders and mooring lines
+ 44lb anchor
+ Auto fire extinguisher in engine room with auto engine shut-down system
+ Lofrans Project 1000 anchor windlass 1000w/12v with 50’ of 5/16” H.T. galvanized chain and 200’ 9/16” line.
- 10-year limited warranty (workmanship and blisters)
- Solid hull laminate
- Black hull-guard with stainless steel insert
- Black anti-fouling paint (two coats)
- Painted boot stripe
- Molded composite skeg protects props and supports rudder
The American Tug 362 has a two-cabin & one-head arrangement. The convertible dinette in the salon makes into a third nicely sized double bed, the AT-362 sleeps six and is perfect for families, grand-kids and fishing friends.
Floors are molded fiberglass and fitted carpets are included.
Cabinetry is our traditional American Tug quality full-face framed wood joinery in a shaker style.
As you enter the salon from the aft-cockpit, the galley is on starboard and the dinette is on the port side. The galley is inline with plenty of counter space. A two-burner stainless Force-Ten LPG stove and oven is included. A stainless steel sink with pressure hot/cold water is mounted in the sold surface counter top.
Port aft in the salon is the Isotherm side by side refer & freezer. This is a 7 cu/ft high efficiency DC unit, it is quite large. The dinette is generously sized and converts to a nice large double berth. The table can fold for additional space, a filler cushion and backrest is included that converts the forward and aft facing dinette into a U-shaped lounger.
Up three steps and you are in the raised pilothouse with full 360-degree visibility. There are port & starboard sliding doors. On port is the co-pilot station with chart table and seating for two. On the starboard side is the pedestal helm chair for the pilot. Nice electronics console will accommodate 1 or 2 twelve-inch multi function displays.
Down three steps and you are in the cabin area. Forward is the master cabin with center-line queen berth. There is storage under the berth. Hanging lockers on both sides of the cabin are built in our shaker style wood joinery.
The guest stateroom is on the port side of the forward companionway. There is a nice standing area with a hanging locker outboard. The double berth is aft and located under the pilothouse, generous double berth is 76" long and 48" wide with plenty of room above. A portlight will bring in fresh air and light. This stateroom is sized for a couple to be comfortable, and similar in sizing to the aft master stateroom found on a 40-foot sailboat.
The head with large stall shower is on starboard and opposite the guest stateroom. Electric head in the corner, a vanity cabinet outboard with sink. Stall shower in the starboard forward corner. Head is made of fiberglass with acrylic door for easy care.
- 4-Hook Line Holder
- 15” hand grab
- Razor Shaft Line Cutter
- Cockpit Shower
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. Some options may be visible in the photographs. Specifications and equipment may change as the boat is developed.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
2027 American Tug 362 Video Tours
Overview from around the web 2027 American Tug 362
Customers are praising the 2027 American Tug 362 for its exceptional craftsmanship and comfortable design
Many highlight the spacious interior layout that maximizes both living and storage space, making it ideal for extended cruising. Owners appreciate its solid construction and reliable performance, noting that the tug handles smoothly even in challenging conditions. The high-quality finishes and attention to detail throughout the boat receive frequent compliments, as does the efficient use of space in the galley and salon areas. Overall, feedback emphasizes the American Tug 362 as a well-designed, dependable vessel that offers both luxury and practicality for coastal and inland waterways.
The Biggest Pros and Cons
The 2027 American Tug 362 offers a blend of classic design and modern functionality, making it a popular choice among cruising enthusiasts. Here are some of the key pros and cons to consider:
Pros
Robust Construction: Built with a solid fiberglass hull, the American Tug 362 is known for its durability and seaworthiness, providing confidence for extended cruising.
Efficient Power: Equipped with a reliable diesel engine, it delivers good fuel efficiency and respectable cruising speeds for a vessel of its size.
Comfortable Interior: The layout maximizes space with a well-appointed salon, galley, and sleeping quarters, offering a cozy and practical living environment.
Easy Handling: Designed with a moderate draft and a single screw, it is maneuverable and suitable for a variety of waterways, including shallow bays and rivers.
Classic Tug Styling: The distinctive tugboat-inspired aesthetic gives it a unique charm and strong presence on the water.
Cons
Limited Speed: While efficient, the 362 is not built for high-speed travel, which may not suit those seeking faster passages.
Space Constraints: Though well-designed, the interior space is more compact compared to larger yachts, which could feel cramped for extended liveaboard periods.
Maintenance Costs: As with many fiberglass trawlers, upkeep and maintenance can be more intensive and costly over time, especially with older components.
Limited Dealer Network: Depending on location, servicing and parts availability may be less convenient compared to more widely distributed brands.
Made For
The 2027 American Tug 362 is designed for boating enthusiasts who value a perfect blend of classic tugboat styling with modern amenities. It's ideal for individuals or couples seeking a comfortable, sturdy, and efficient vessel for coastal cruising and extended voyages. This model appeals to those who appreciate high-quality craftsmanship, spacious interiors, and reliable performance, making it a great choice for both seasoned boaters and those new to tug-style yachts.
Be the first to know when similar boats hit the market
Get notified when new boats become available
Meet the Broker
Address
Boat Location
Contact American Tugs & Trawlers
800 S Pearl Jensen Way, At The American Tug Factory, La Conner, WA, 98257
Login with Google
