2008 Hell's Bay Waterman

2008 Gordon Boatworks Waterman 16 - Full refit in 2021! Garage Kept!

2021 Tohatsu 50hp 4 stroke- under 100 hours! Factory Warranty Through 5/18/2026

2015 Ram-Lin Anodized Aluminum Waterman Trailer- dry launch style with electric winch

*PRICE IMPROVEMENT 2/13/26*

NOW LISTED AT $39,900

This is probably the most updated, cleanest and customized Waterman 16 in existence. This boat was fully refit by the Skiff Shop in 2021. No expense was spared in custom rigging and fiberglass work to bring it to the exact spec of the owner. It has been meticulously serviced, maintained and preserved by the owner since completing the refit. It has been used mostly in ENP and Key Largo.

This skiff must been seen in person to fully appreciate and comprehend the immaculate condition, color coordination and the attention to detail. Call or text me today to schedule your showing on this showpiece skiff!

Equipment, Customizations, & Highlights:

Hull

-Matterhorn White Hull with an Ice Blue Deck

-Most everything on the boat is color matched or color coordinated in Ice Blue, White, & Grey for a clean and yacht-like look.

-LED shark eye navigation lights on hull sides

-Small aluminum rub-rail

-Lenco electric trim tabs, the actuators have been painted to match the hull

-Custom grey waterman logo

Console

-Custom one-off console - this was built to be multi-functional. It serves as a grab bar for the operator whether standing or sitting. It houses an array gauges and switches. Plus, it provides battery storage, cooler storage, and a comfortable passenger seat.

-Custom array of gauges at helm - tach, volt, trim

-Custom rocker style trim tab & engine trim switches

-Custom backlit acrylic switch panel with push button switches

-Paracord rope wrapped grab handle

-Forward facing jump seat with backrest

-Heavily insulated built-in cooler under jump seat with drain to deck

-Stainless steel cup holder

Deck

-This Waterman 16 is one of the Tom Gordon built boats that feature a 3 aft hatch layout with a full aft bulkhead. There is plumbed center live-well, and dry storage port/starboard with the port side hatch having a drained divider for another built-in cooler option.

-Ice blue awlgrip non-skid

-Grey under-gunnel carpet

-Casting platform hardware mounted on forward hatch

-Bolt-on style seat cushions. White with blue piping trim. These are firm, closed cell foam cushions that will hold up and provide continued support over time.

-Custom built poling platform to perfectly fit the 50hp Tohatsu, this allowed the tower to be lower and provide easier access up & down. Wide leg design to accommodate the tiller arm

-Custom switch box mounted under platform, starboard side for additional engine trim & trim tab control

-Interior cockpit lip is trimmed out in aluminum to match the exterior rub rail

-Eyelet mounted on tip of bow for docking and anchoring with a quick release clip

-Cockpit lights (white LED)

-Renzetti polish aluminum push pole holders (push pole not included)

-Sea Dek pad on poling tower- Ice Blue

-The under gunnel rod racks and rod tubes were designed to handle everything from large spinning rods to fly rods and allow for easy loading and retrieval without bunching up. 4 forward facing tubes per side & 3 aft facing tubes on the port side

-Cockpit liner flat floor with center drainage to bilge

Compartments

-Pre-wire for 12vt trolling motor w/power pux quick release bow mount

-lithium-ion batteries for both trolling system & house

-Trolling motor battery located on a shelf in front hatch & starting battery located in console

-White LED locker lights in ALL storage lockers including console, live-well & bilge area

-Gas strut hatch lifts on all hatches

-NOCO on-board charger mounted in forward hatch, connection plug inside locker

-plumbed live-well with high speed pickup & air stone bubbler

-Custom storage compartment built under the aft center hatch in front of the live-well.

-Gemlux compression twist latches on all deck hatches

Engine

-Factory white Tohatsu 50hp four stroke tiller

-15" short shaft lower unit to accommodate original 16 Waterman transom height

-Power-Tech 3 Blade stainless steel prop

-Carbon Fiber tiller extension handle (painted white) with rope wrap grip & trim switch

-Current hours are estimated at well under 100 (can get computer read out)

-Tohatsu warranty until 5/18/2026

Trailer

-Anodized aluminum with stainless steel cross members

-Dry launch style, owner never dunks the wheels or hubs

-Power Winch system with remote pull cord

-Spare Tire & Carrier

-12" Trailer walk-board

-Grey bunk carpet to match boat accents

-Custom rope work trailer tie downs

Additional Options & Notes

-Custom fresh water wash-down system. Tank & pump mounted in port side aft storage locker. Fill mounted on aft deck near bilge access. Expandable hose mounted in bilge area.

-Custom rigging and service receipts on file.

This skiff is so feature rich and it looks even better in person! Don't hesitate to reach out to learn more about making this amazing skiff yours today! Inquiries can contact Matt Norman at two.three.nine.849.4719