2024 Weaver 43

Stunning 2024 Weaver 43' Bay Boat - Maryland Craftsmanship at Its Finest

Located in Annapolis, MD

If you're looking for a true head-turner that blends classic Chesapeake Bay style with cutting-edge performance, this 2024 Weaver Boatworks 43 foot Bay Boat delivers in every way. Handcrafted in Maryland by some of the best in the business, she's equally at home cruising with family, anchored in a secluded cove, or chasing fish offshore.

This is not just a boat - it's an experience. From her sleek lines to her premium fit and finish, every inch has been designed for comfort, efficiency, and versatility. She's fully loaded, lightly used, and ready for immediate enjoyment.

Highlights:

*Scania 900 HP Diesel Engine - Only 110 hours, smooth and powerful

*Vetus 8 - Bow & Stern Thrusters - Joystick control for effortless docking

*SeaKeeper 6 Gyro Stabilizer - 75 total run hours (50 sea hours) for rock-solid stability

*Onan 9 kW Generator - With sound shield for quiet comfort

*Twin Crusair AC Units - Reverse-cycle heat for year-round enjoyment

* FLIR Thermal Imaging - Navigate safely even at night

*Fully Equipped Helm - Autopilot, Fusion stereo system, underwater lights

*Well-Appointed Cabin - Head with sink, refrigerator, freezer, microwave

Whether you're planning sunset cruises with friends, long weekends exploring the Bay, or heading offshore for serious sportfishing, this Weaver 43' is a rare opportunity to own a near-new, custom-built masterpiece without the wait.

Contact Chase Sutton today to arrange your private showing. Financing Options available.

Construction:

Hull Description: Planning modified deep V with tumble home transom, flared bow, lifting strakes and hard chimes.

• 1 Layer 9 mm and 1-layer 6mm Okume plywood
• 2 Layers 1708 E-glass outside bottom impregnated with epoxy
• Laminated Douglas fir stringers glass encapsulated
• 2 Layers 1708 E-glass inside bottom to chine
• Hull side's layers 1-6mm and 1- 9mm Okume plywood
• 2 layers E-glass outside impregnated with epoxy
• Epoxy coated Okume from chine to sheer
• Laminated Douglas fir battens, sheer clamp and chines
• All bilges, engine compartment gelcoated
• 2 Layers 12mm Okume plywood on house sides
• 2 layers 6mm Okume plywood on floor over 1½ Nidacore
• 1-layer E-glass impregnated with epoxy each side
• 1/4" tempered tinted glass for side, back and door window
• A buildup of epoxy mixed with sand able faring compound and block and sanded smooth.
• Dockside and overboard pump outs for holding tank
• Awlcraft high gloss polyurethane boot stripe
• 6 primer coats of paint
• Finish Paint: Awlcraft 2000
• Ablative/Copolymer anti-fouling bottom paint (3 coats using Interlux Interprotected epoxy primer system

General Interior:

• Interior cabinetry and doors to be custom crafted, wood to be determined from builder's selection.
• The Cabinetry is to be constructed with combination of plywood, Divinycell, tri-cell and Nida-core.
• Countertops to be KVF or Corian
• Chrome hardware is to be used throughout.
• Amtico flooring where specified to be selected by owner

Exterior Finishes:

• Awlcraft 2000

General Specs:

• (2) 180 gallon tanks
• 55-gal water capacity
• 8" muffler by Centek
• Aluminum Fuel Tanks
• Vetus 8" bow and stern thruster with joystick controls
• SeaStar Optimus Steering
• (1) 16,000 BTU and (1) 12,000 BTU AC- Crusair with digital control
• ONGARO windshield wiper deluxe system

Décor

• All hardware metal finishes in Chrome throughout
• Designer carpet in forward bunk area
• Designer fabrics by Kravet for forward bunk
• Ultraleather seating in salon and dinette

Main Salon:

• Electric Sliding composite door
• Electrical panel
• (1) 16,000 BTU and (1) 12,000 BTU AC Crusair digital control
• Tinted 1/4" tempered glass
• Ultra Leather sofas and dinette constructed by Costa Marine Canvas, Inc.
• Air conditioning with reverse cycle heat and individual temperature control
• Decorative throw pillows for sofa
• Fixed, side windows with tinted, tempered glass for style, and natural lighting
• Lighting, overhead LED lights
• Outlet in head, galley kitchen area and outlet with USB connection in dinette area
• Main electrical panel with AC selector breakers
• Whisper Wall headliner, owner's choice of color, 1/8" foam and tricot backing
• Teak laminate cabinetry with drawers
• TV lift installed for 40" TV
• Microwave/convection oven located in galley cabinet
• Sink, stainless steel, under-mounted in countertop with Chrome galley faucet
• KVF or Corian countertops and sink with single lever faucet
• Appliances:
• Refrigerator
• Microwave/Convection GE or compatible

Head:

• Fresh Water Flush Raritan Atlantes Head
• A/C Supply
• Wallpapered walls
• Lighting, overhead LED lights recessed in ceiling
• Medicine cabinet with mirrored doors
• Receptacle, 120V GFCI
• Wet head shower with shower track
• Towel bar and ring in Chrome finish
• Exhaust fan

Forward bunk:

• (2)- V bunk beds
• Soft goods by Costa Marine Canvas, Inc. including covered cushion
• Carpeted floors
• Air conditioning/heat with temperature control
• Hanging locker, teak with bar for hanging clothes
• Whisper Wall headliner, owner's choice color, 1/8" foam and tricot backing
• Storage cabinet located under hanging locker

Running Gear:

• Flush mount Nibral strut
• (1) Aquamet 22 DN Double Taper Shaft 2 1/2" shaft
• 4 blade Nibral propellers by Veems
• 1½" Stainless steel rudder
• Dripless rudder ports and glands by Tides Marine
• Shaft tube with dripless shaft seals by Tides Marine

Forward deck:

• Polished stainless-steel Plow type anchor with 20' chain and 250' of rope
• Non-skid walk area
• Cleats
• (1) Vetus anchor pull windless system operable from deck or wheelhouse

Cockpit:

• Teak covering boards
• Transom livewell
• Stainless steel insulated ice bin
• (6) -Rod holders in covering boards
• Dockside electric connection (2) 30-amp SS shore power inlet and (2) 50 Hubbell 30A yellow vinyl shore cable
• Dockside water connection in cockpit
• Fresh and salt water wash down with hose bib located under gunwale
• Waterproof deck hatch with access to steering system, trim tabs, generator and pumps
• Painted non-skid deck
• Self-bailing cockpit with scuppers
• Deck fill freshwater tank from dockside inlet

Engine Room and Mechanical:

• Scania 900 HP 13 liter engine (1 ZF 400 IV electronic transmission at 1.76 ratio)
• (1) SeaKeeper 6 Gyro
• Battery switches Blue Sea Systems
• Onan 9 KW Generator with sound shield
• (4) - bilge pumps
• Internal sea strainers for generator, and all other sea water pickups
• Muffler - engines linear type located in engine compartment
• Muffler - generator
• PEX plumbing, fresh water system with manifold system to isolate individual areas
• Propellers, Class "S" pitch tolerance (ISO 484/2) and dynamic balancing. Advanced design cambered blade sections for optimum performance. Nibral alloy for maximum durability.
• Racor fuel/water separator filters for main engines and single for generator. Clear bowl type, top-loading for convenient replacing
• Rudder, Nibral composite rudder bearing with dripless seal laminated into hull
• Seacocks, bronze, ball-type sea valves for all thru- hulls below the water line
• Shaft - (1) Aquamet high-strength stainless steel, double-taper with machined keyway
• Struts - thru-water, Nibral bearings
• Tides Marine water lubricated dripless shaft seal

Plumbing:

• Hot & cold water supply
• Atwood 11-gal hot water heater
• 55 gal water tank
• 35 gal holding tank

Electrical:

• Wired to ABYC standards All Wires to be labeled at each end
• (2) 30-amp cords- AC shore power cords
• Paneltronics Panels
• Transom mounted zinc
• All necessary wiring to supply all specified 110 volts and 12-volt systems
• 120V AC power supply
• Anchor light/navigation lights
• Batteries, (3) independent 12V banks maintenance free
• Battery charger with thermal cutoff and switching system for complete integration
• Battery distribution panels with battery cutoff for ship service batteries and engine batteries
• Bonded electrical system with ground plate
• DC LED interior lighting throughout excluding companionway

Miscellaneous:

• (2) Fire extinguishers
• Side-mounted grab rails, aluminum on top of cabin top
• Stainless steel bow, spring and stern cleats thru-bolted
• Zinc on transom

Electronics:

• Dual Garmin Chartplotters with Sonar at Helm, Radar, side scan transducer-fishing setup
• Single 27" Garmin Chartplotter screen exterior hanging from Top- fishing setup

Extras:

• Underwater lights
• Spotlight on hardtop
• ACR Alternator setup
• Oil transfer pump
• Teak toe rail
• Step Box
• Propspeed added Fall 2024
• Additional port outlet w/ 2 usb
• Under gunnel lights - (4) Lumitec 12" bar lights
• Garmin display box
• Tackle Box
• Additional rod holders - (2) at transom