2019 Nitro Z19
$33,900
Boat in Kodak, TN 37764 US
Built in 2019
Z19
1 Engine (--)
19.3 feet
Gas
Fiberglass/Reinforced
At 19' 4" and with 200HP standard, the NITRO® Z19 is fast enough for the most demanding tournament angler and nimble enough to get into places where bigger, heavier boats can't. This is thanks in part to our exclusive NITRO® Vortex Technology™ (NVT™) hull, which improves holeshot, acceleration and overall performance. The Z-Core™ seating system with Force Flex suspension provides industry-leading comfort, and it's rigged with a Mercury® outboard, Minn Kota® trolling motor, Lowrance® fishfinder and a custom, factory-matched trailer with GALVASHIELD® Impact corrosion and chip protection.
- Length:19' 4"
- Length: 19' 4"
- Beam: 7' 10"
- Bottom width: 6' 2"
- Max. recommended HP: 200 HP
- Fuel capacity: 50 gal.
- Max. person capacity: 4 persons
- Max. person weight: 500 lbs.
- Max. person, motor & gear weight: 1375 lbs.
- Interior depth: 18.5"
- Transom height: 23"
- Deadrise: 16 degrees
- Draft: 15"
- Average dry weight: 1850 lbs.
- Average package weight: 3249 lbs.
- Package height: 5' 7"
- Package width: 8' 6"
- Towing length: 25' 0"
- Storage length: 22' 7"
Comfort, Convenience & Peace of Mind
- NMMA® certified
- Flotation meets or exceeds NMMA® & U.S. Coast Guard Requirements
- EPA-compliant fuel system
- Non-skid mats bow & stern
- 6 drink holders
- 4 stainless steel pull-up cleats
- Integrated fold-down stainless steel reboarding ladder, angled for allowing optional shallow-water anchor
- 4 grab handles (1 at each seat)
- Built-in tournament ruler & holder
- Fire extinguisher
- Horn
- Paddle
Console
- NEW Lowrance® HOOK2 5 Combo flush-mounted fishfinder
- Hydraulic steering w/tilt
- Removable acrylic, tinted windscreen
- Ready to accept optional removable port console
- Custom-molded modular console w/2-tone gelcoat
- Veethree® multifunction instrumentation w/speedometer/fuel gauge, tach/trim gauge, voltmeter gauge & water pressure gauge
- Dash light dimmer
- Waterproof, capacitive touch digital keypad
- LED courtesy light
- 12V outlet
Construction & Exterior
- 100% composite deck core w/superior thermal stability & strength-to-weight ratio
- Deck & hull chemically bonded & mechanically fastened w/stainless steel fasteners every 2" (5.08 cm)
- Gelcoated stringer/liner system
- Foam-filled hull for optimal buoyancy & safety
- Full-width fiberglass-encapsulated composite transom
- Low-profile gunnels to maximize deck size & for easier casting
Electrical
- Bow panel w/trolling motor receptacle, anchor/light switch, trim switch & capability to flush mount 12" (30.5 cm) graph
- 1,000 GPH (3,785 LPH) bilge pump
- LED console courtesy light
- Manual LED-lighted bow gear storage
- Automotive-style labeled fuse panel w/cover
- Interstate® 31M-AGM cranking battery
- 2 heavy-duty Interstate® Series 29 trolling batteries
- 2-bank, 8-amp battery charger w/exterior receptacle
- 6-gauge trolling motor wiring w/50-amp circuit breaker
- Master power switch
- Waterproof Deutsch plugin gauge connectors
- Water/abrasion-resistant connectors
Interior
- 34-sq.-ft. (3.2-sq.-m) bow deck for casting mobility w/lots of storage
- Bike seat w/pedestal
- Folding fishing seat w/composite frame
- Z-Core™ seating system w/Force Flex suspension & contoured, rotomolded frame for driver & passenger seats
- Trolling motor pedal recess for Minn Kota® & MotorGuide® trolling motors
- Port & starboard bow rod hold-down straps
- Molded-in drainage channels around bow storage compartments
- Oversized, lockable port & starboard bow rod lockers w/lift assists for rods up to 8' (2.44 m)
- Oversized lockable center bow storage locker
- Step to bow deck w/62-qt. (58.7 L) insulated cooler & removable trash receptacle
- Partner rod ramp w/rod handle organizer & hold-down strap
- Footrest w/non-skid mat under console(s)
- Designated net storage behind seating
- 2 lift-out, molded aft storage boxes that will each accept seven 3700 tackle trays
- Molded utility rigging compartment for easy access to batteries & pumps & easy cleanup
- Lift-out tool/rope storage tray in rigging compartment
- Insulated aluminum lids w/welded corners
- 16-oz. (.45 kg) plush, marine-grade cut pile carpet on decks & floor
- Lockable compression latches
Livewell Systems
- 2 aft 19-gal. (72 L) insulated Guardian™ livewells w/digital timers
- 750 GPH (2,840 LPH) livewell recirculation/pump-out system
- 500 GPH (1,893 LPH) aerator/fill pump
- Dual remote drain controls
- Rotomolded w/rounded corners
Performance
- NITRO® Vortex Technology™ (NVT™) hull for a smoother, drier ride
- Rapid Planing System™ (RPS™) for quicker holeshots & maximized speed
- 8" (20.3 cm) adjustable jack plate
- Rigging tube for organized wiring & abrasion resistance
- Stainless steel propeller
Trailer
- Custom-fit, single-axle NITRO® trailer w/powder-coat finish & GALVASHIELD® Impact corrosion & chip protection for improved durability
- 7-pin connector
- 15" (38.1 cm) chrome wheels w/radial tires
- Surge disc brakes
- Inside the frame brake line system w/1-point bleed
- No Touch Vortex hub lubrication system w/6-year, 100,000-mile limited warranty
- Spare tire carrier (spare tire avail. at additional cost)
- All-welded rectangular GALVASHIELD® frame
- Space-saving swing-away tongue to reduce storage length
- Heavy-duty winch w/nylon strap & bow safety strap
- Outboard motor support to reduce hull & transom stress while towing
- Carpeted bunks & fender boards to protect hull
- Submersible LED lights
- Safety cables
Trolling Motor
- Minn Kota® Maxxum® 24V, 70-lb. (31.8 kg) thrust, 42" (1.07 m) shaft, foot-control trolling motor
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. All sales are final. No returns accepted.
Price History
| Date | Event | Price |
|---|---|---|
| 2/19/26 | Initial price | $33,900 |
Videos from Bass Pro Boating Center | Sevierville, TN on this 2019 Nitro Z19
2019 Nitro Z19 Video Tours
Overview from around the web 2019 Nitro Z19
Customers are praising the 2019 Nitro Z19 for its excellent combination of performance and comfort
Many highlight its spacious deck layout, making it ideal for both fishing and family outings. Anglers appreciate the boat’s stability and smooth handling, along with ample storage for gear. The quality of construction and attention to detail in the design are frequently mentioned, as well as the reliable and powerful engine options. Overall, owners find the Nitro Z19 to be a versatile and dependable fishing boat that delivers great value on the water.
The Biggest Pros and Cons
The 2019 Nitro Z19 offers a range of features that make it a popular choice for fishing enthusiasts and recreational boaters alike. Here are some of the pros and cons to consider:
Pros
Spacious Layout: The Z19 provides ample deck space for fishing and entertaining, with well-designed storage compartments to keep gear organized.
Performance: Equipped with a reliable outboard engine, it delivers smooth handling and good speed, making it suitable for both calm lakes and moderate offshore conditions.
Quality Construction: Nitro is known for durable build quality, and the 2019 Z19 features a sturdy hull and premium materials that ensure longevity.
Versatile Seating: Comfortable seating arrangements accommodate multiple passengers comfortably, with options for adjustable seats and casting platforms.
Fishing Features: Includes specialized features such as rod holders, live wells, and fish finders, catering specifically to anglers.
Cons
Price Point: The 2019 Nitro Z19 can be on the higher end of the price spectrum compared to some competitors with similar specs.
Fuel Efficiency: Depending on the engine choice and usage, fuel consumption may be higher than more compact or lighter models.
Storage Limitations: While storage is generally good, some users may find it limited when packing for extended trips or carrying extra equipment.
Weight: The boat's solid construction adds weight, which might affect trailering ease and require a more powerful towing vehicle.
Made For
The 2019 Nitro Z19 is designed for anglers who demand a versatile and high-performance bass boat. It’s ideal for both serious tournament fishermen and weekend anglers looking for a reliable, comfortable, and well-equipped boat that can handle a variety of fishing conditions. Whether you're casting inshore lakes or navigating larger waters, the Z19 offers the perfect blend of speed, stability, and ample storage to meet the needs of passionate bass fishermen.
Be the first to know when similar boats hit the market
Get notified when new boats become available
Meet the Broker
Address
Boat Location
Contact Bass Pro Boating Center | Sevierville, TN
3629 Outdoor Sportsmans Place, Kodak, TN, 37764
Login with Google
