2018 Nitro Z19 Pro
$32,950
Boat in Kodak, TN 37764 US
Built in 2018
Z19 Pro
1 Engine (--)
19.3 feet
Gas
Fiberglass/Reinforced
24v Trolling Motor with Helix 12" and 10"
The NITRO® Z19 Z-PRO Package gives you a host of the most popular high-performance upgrade options at an incredible value-you save more than $1,235 off the normal upgrade price!
The Z19 Z-PRO Package comes factory-rigged with a powerful Minn Kota® Fortrex® 80-lb. thrust, 24V trolling motor to make moving the boat effortless.
The basis of the Z19 is our NITRO® Vortex Technology™ (NVT™) hull-a design that uses a series of parabolic curves instead of traditional strakes, resulting in a hull that's faster, gives more lift while on plane and improves turning. And it rides proudly on a custom-matched trailer with GALVASHIELD® Impact corrosion and chip protection, tongue step, boarding handle and swing-away tongue.
- Length:19' 4"
- Length: 19' 4"
- Beam: 7' 10"
- Bottom width: 6' 2"
- Max. recommended HP: 200 HP
- Fuel capacity: 50 gal.
- Max. person capacity: 4 persons
- Max. person weight: 500 lbs.
- Max. person, motor & gear weight: 1375 lbs.
- Interior depth: 18"
- Transom height: 23"
- Deadrise: 16 degrees
- Draft: 15"
- Average weight: 1850 lbs.
- Package width: 8' 6"
- Towing length: 25' 0"
- Storage length: 22' 7"
Comfort, Convenience & Peace of Mind
- NMMA® certified
- Flotation meets or exceeds NMMA® & U.S. Coast Guard Requirements
- EPA-compliant fuel system
- Non-skid mats bow & stern
- 6 drink holders
- 4 stainless steel pull-up cleats
- Integrated fold-down stainless steel reboarding ladder, angled for allowing optional shallow-water anchor
- 4 grab handles (1 at each seat)
- Built-in tournament ruler & holder
- Fire extinguisher
- Horn
- Paddle
Console
- NEW capacitive touch keypad
- Hydraulic steering w/tilt
- Removable acrylic, tinted windscreen
- Ready to accept optional removable port console
- Custom-molded modular console w/2-tone gelcoat
- Veethree® multi-function instrumentation w/speedometer/fuel gauge, tach/trim gauge, voltmeter gauge & water pressure gauge
- Dash light dimmer
- LED courtesy light
- 12V outlet
Construction & Exterior
- NEW 100% composite deck core w/superior thermal stability & strength-to-weight ratio
- Deck & hull chemically bonded & mechanically fastened w/stainless steel fasteners every 2" (5.08 cm)
- Gelcoated stringer/liner system
- Foam-filled hull for optimal buoyancy & safety
- Full-width fiberglass-encapsulated composite transom
- Low-profile gunnels to maximize deck size & for easier casting
Electrical
- Bow panel w/trolling motor receptacle, anchor/light switch, trim switch & capability to flush mount 12" (30.5 cm) graph
- 1,000 GPH (3,785 LPH) bilge pump
- LED console courtesy light
- Bow navigation lights integrated into gunnels w/stowable stern light
- Manual LED-lighted bow storage
- Automotive-style labeled fuse panel w/cover
- 2 heavy-duty Interstate® Series 29 trolling batteries
- 2-bank, 8-amp battery charger w/exterior receptacle
- 6-gauge trolling motor wiring w/50-amp circuit breaker
- Master power switch
- Waterproof Deutsch plugin gauge connectors
- Water/abrasion-resistant connectors
Interior
- NEW Z-Core seating system w/Force Flex suspension & contoured, rotomolded frame (driver & passenger seats)
- 34-sq.-ft. (3.2-sq.-m) bow deck for casting mobility w/lots of storage
- Step-up to bow deck w/62-qt. (58.7 L) insulated cooler & removable trash receptacle
- Bike seat w/pedestal
- Folding fishing seat w/composite frame
- Designated net storage behind seating
- Trolling motor pedal recess for Minn Kota® & MotorGuide® trolling motors
- Oversized, lockable port & starboard bow rod lockers w/lift assists for rods up to 8' (2.44 m)
- Molded-in drainage channels around bow storage compartments
- Port & starboard bow rod hold-down straps
- Oversized lockable center bow storage locker
- Partner rod ramp w/rod handle organizer & hold-down strap
- 2 lift-out, molded aft storage boxes that will each accept seven 3700 tackle trays
- Molded utility rigging compartment w/lift-out tool/rope storage tray
- Molded utility rigging compartment for easy access to batteries & pumps & easy cleanup
- 16-oz. (.45 kg) plush, marine-grade cut pile carpet on decks & floor
- Lockable compression latches
- Footrest w/non-skid mat under console(s)
- Insulated aluminum lids w/welded corners
Livewell Systems
- 2 insulated aft 19-gal. (72 L) Guardian™ livewells w/digital timers
- 750 GPH (2,840 LPH) livewell recirculation/pump-out system
- 500 GPH (1,893 LPH) aerator/fill pump
- Dual remote drain controls
- Rotomolded w/rounded corners
Performance
- NITRO® Vortex Technology™ (NVT™) hull for a smoother, drier ride
- Rapid Planing System™ for quicker holeshots & maximized speed
- 3" (7.6 cm) adjustable jack plate (Verado® only)
- 8" (20.0 cm) adjustable jack plate (Optimax® only)
- Rigging tube for organized wiring & abrasion resistance
- Stainless steel propeller
Trailer
- Custom-fit NITRO® trailer w/powder-coat finish & GALVASHIELD® Impact corrosion & chip protection for improved durability
- Surge disc brakes
- Inside the frame brake line system w/1-point bleed
- No Touch Vortex hub lubrication system w/6-yr. 100,000-mile limited warranty
- Spare tire carrier (spare tire avail. at additional cost)
- All-welded rectangular GALVASHIELD® frame
- Space-saving swing-away tongue to reduce storage length
- 1,200-lb. (544 kg) swing-up locking jack w/swivel wheel
- Heavy-duty winch w/nylon strap & bow safety strap
- Outboard motor support to reduce hull & transom stress while towing
- Carpeted bunks & fender boards to protect hull
- Submersible LED lights
- Safety cables
Z-PRO Package
- NEW 2 Lowrance® Elite-9 Ti flush mounted fishfinders (bow & console)
- Minn Kota® Fortrex® 24V, 80-lb. (36.3 kg) thrust, 45" (1.14 m) shaft, foot-control trolling motor w/Universal Sonar 2
- NEW cable trolling motor handle
- NEW T-H Marine livewell culling system
- Factory-applied keel protector
- 3-bank, 30-amp battery charger
- Bow port rod organizer
- Snap-in sandwich tray for step-up to bow deck cooler
- Hot Foot™ throttle & Pro-Trim lever
- Remote oil fill (standard)
- 31M-AGM cranking battery upgrade
- Retractable transom trailer tie downs
- Tandem-axle trailer w/steel fender, surge brakes on 1 axle
- Custom 14" (35.56 cm) aluminum wheel upgrade for tandem-axle trailer w/spare tire
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. All sales are final. No returns accepted.
Price History
| Date | Event | Price |
|---|---|---|
| 2/19/26 | Initial price | $32,950 |
2018 Nitro Z19 Pro Video Tours
Overview from around the web 2018 Nitro Z19 Pro
Customers rave about the 2018 Nitro Z19 Pro for its impressive combination of performance, versatility, and comfort
Many highlight its smooth handling and powerful Mercury engine, making it ideal for both fishing and family outings. Anglers appreciate the spacious deck layout, ample storage, and advanced fishing features that enhance their time on the water. Additionally, users often mention the quality craftsmanship and sleek design, noting that the boat delivers excellent value for its price. Overall, the Nitro Z19 Pro is praised for providing a reliable, enjoyable boating experience.
The Biggest Pros and Cons
The 2018 Nitro Z19 Pro is a versatile bass boat designed for both serious anglers and recreational boaters. Here are some of the pros and cons to consider:
Pros
Spacious Deck: The Z19 Pro offers a large, open deck area that provides plenty of room for fishing and moving around comfortably.
Durable Construction: Built with high-quality materials, this model ensures longevity and withstands tough fishing conditions.
Powerful Performance: Equipped with a reliable engine setup, it delivers strong speed and excellent maneuverability on the water.
Advanced Storage Solutions: Multiple compartments and rod lockers help keep gear organized and easily accessible.
Comfort Features: Includes ergonomic seating and user-friendly controls for a comfortable boating experience.
Versatile Design: Suitable for both freshwater and light saltwater fishing, making it a flexible choice for various environments.
Cons
Weight: The boat’s sturdy build can make it heavier, which may require a more powerful towing vehicle.
Limited Seating Capacity: While spacious for fishing, seating is primarily designed for a small crew, which might not accommodate larger groups comfortably.
Basic Electronics (Standard): Depending on the package, some users may find the standard electronics lacking and might want to upgrade for advanced fish-finding capabilities.
Price Point: As a premium bass boat, the Z19 Pro may be priced higher than entry-level models, which could be a consideration for budget-conscious buyers.
Made For
The 2018 Nitro Z19 Pro is designed for serious anglers who demand top performance and versatility on the water. Whether you're a tournament fisherman or a weekend angler, this boat offers the perfect blend of speed, stability, and advanced features to help you make the most of your fishing experience. Its spacious layout and durable construction make it ideal for those who want a reliable, high-quality bass boat built to handle various fishing conditions.
Be the first to know when similar boats hit the market
Get notified when new boats become available
Meet the Broker
Address
Boat Location
Contact Bass Pro Boating Center | Sevierville, TN
3629 Outdoor Sportsmans Place, Kodak, TN, 37764
Login with Google
