1999 Beneteau Oceanis 352

Electrical

• SeaTalk converter NMEA 2000 (N2K)

• 3-house flooded house batteries

• 1-starter flooded battery

• 110v shore power system

• ProMariner 40 Amps 3 bank battery charger

• Alternator 55 amp• Balmar SG200 battery monitor

• (12) 12v circuits

• (4) 110v outlets

Electronics

• (2) Garmin GMI 20 display instruments

• Airmar Thru-Hull Triducer multisensor (depth and speed)

• Garmin 541s GPSMAP 500 series

• Raytheon Electronics Autohelm ST4000 Plus autopilots

Deck Equipment

• Bow pulpit in s/s, with red/green navigation lights

• Bimini, dodger, helm cover, and connectors

• Cockpit Cushions

• (6) x 20” stanchions with double lifelines and (2) gates

• (2) teak handrails on coach roof

• Extruded anodized aluminum toerails

• Stern anchor roller

• Horizon Express Anchor windless

• (4) a

• Anodized aluminum mooring cleats

• Chain locker with electric windlass and anchor rode

• (2) coach roof mounted mainsheet Genoa sheet tracks with roller bearing cars

• Genoa sheet turning blocks with stoppers

• Coach roof mounted mainsheet traveller with roller bearing car

• (2) Blocks with (6) sheaves for lines led to cockpit

• (6) Spinlocks clutches for halyards, Genoa furler, mainsail inmast furler, main sheet,

and topping lift

• (2) Coach roof mounted Lewmar 44CSTO winches, for halyards and Genoa sheets

• (2) Sail lockers one full depth, one shallow

• (1) Molded locker for gas propane tank

• (1) Fixed cockpit table/icebox with (2) leaves

• Steering wheel, 42” diameter with console for engine controls and electronics

• Access via fold down door to stern bathing platform, with locking mechanism

• Recessed swim ladder with teak steps

• Cockpit shower on transom

• Stern light

Rigging

• Z Spar anodized aluminum furling mast and boom, (2) sets of spreader

• Rigid Boom Vang• S/S rigging (frosty, forward lower shrouds, aft lower shrouds, upper shrouds,

intermediates, twin backstays

• Running rigging located in the cockpit: (2) Mainsheets, (2) Genoa sheets, (1) Mainsail

halyard, (1) Genoa halyard, (1) Spinnaker halyard, (1) Traveler cross haul lines, (1)

Boom vang pennant, (1) furling control line

• Asymmetrical sail and bag

• Furling Genoa 140%

• Furling Dacron mainsail

Salon

• Mermaid AC and heating

• Salon table with U shaped settee (can be transformed into double berth)

• Storage space beneath settee(s)

• (4) Reading light

• Deck hatch 20” x 14” with blind

• Fixed hatch above the table

• Hatch 26” x 71/2” with blind

• (3) Fixed hull porthole

• Mounted fan

• (4) halogen overhead lights

• Chart table aft with storage space

• (12) function AC/DC electrical panel

• HVAC control panel

• (1) halogen light

• (1) red light over table

• Galley headroom 6’3”

• Stainless 2-sink

• Kuma marine Hot and cold water

• Forge 10 gimbaled stove with oven

• Adler Barbour 12 volt electric 4.5 cu ft refrigerator

• 6 gallon hot water heater

Recent Improvements / Maintenance since purchase in 2019

2025 - Overhaul of Yanmar engine by AR Diesel, starter battery replacement

2024 - New dodger, bimini, connector, helm, bimini boot and window covers

2023 - House battery replaced, new lifelines,

2022 - New VHF and Command Mic (iCOM), Kuuma water heater,

2020 - Soda blast hull and barrier coat, portlight lens and handle replacements,

ProMariner Pro Nautic 40 amp battery charger

2019 - Deluxe winter cover, new sanitation hose, new running rigging

Oil, air filters, coolant and impeller replaced EVERY year

Wax/polish every year

Bottom paint every year

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.