Manufacturer Provided Description
Sabre turned to Jim Taylor to design a daysailor with the style and elegance of sailing yachts of a bygone era and added to the design mandate blending the performance of a youthful sport boat with "grown-up" ease of handling available with today's modern sailing hardware. The overhangs of the Spirit's hull convey a traditional elegance, while her nominally narrow beam allows her to sail beautifully and responsively.
Accommodations
Below there is a simple yet elegant layout built with the Maine craftsmanship and quality for which Sabre Yachts is so well known, such as dovetailed drawer boxes, inlaid steps and tables, and laminated trims. A fully functional galley is found to port of the companionway and to starboard is an enclosed head. Her navigational/chart table is forward and to port at the forward end of the salon.
Her salon offers twin port and starboard settees which surround an inlaid centerline drop leaf table. A traditional teak and holly sole adds warmth to this elegant cabin. And at the forward bulkhead a ring frame surrounds the opening to the forward cabin sleeping accommodation.
MFG Description of Hull and Deck
As is typical of all Sabre yachts, deck hardware and fittings are of the highest standards. Her carbon spar, chosen for added performance and increased stability.
Below deck, a standard sail drive engine reduces vibration and increases propulsion efficiency. Keels and rudder offer the latest in technology and performance. The Spirit's deck is stylish and uncluttered. Her simple sailing rig consists of an easily managed self-tacking jib and a conventional mainsail to ensure optimum performance. Her furling jib is attached on to a below-deck furler, so that only the sail is visible above the deck line, and her mainsheet is led from an aft deck traveler to the helm, allowing short or single-handed sailing with little effort.
Custom toe rails, stem head fitting, mooring chocks and cleats all add to the graceful beauty of her lines. Her cockpit is long and hospitable and offers comfortable seating for her owners and guests.
Description
HULL LAMINATE
- Single unit, hand-laminated E glass, cored with Divinycell closed cell PVC foam
- ISO NPG gelcoat.
- Below waterline chopped strand glass and vinylester resin as a back up for ISO NPG gelcoat.
- Internal deck to hull joint.
- Double boot and single cove stripes.
- Bulkheads, berth faces, shelves and floor stringers laminated to hull providing integral, structural strength.
- Traditional Transom
DECK LAMINATE
- Single unit, hand-laminated fiberglass with Divinycell core for stiffness, and Divinycell HD core in high-stress areas.
- The deck is fastened to the hull using stainless steel thru bolts
- 3M 5200 Polyurethane sealant in the deck to hull joint.
- Propane storage locker in starboard side deck
STEERING SYSTEM
- Edson wheel steering with 48” five spoke Comfort Grip Destroyer wheel, guard and brake
- Additional smaller wheel for more space in the cockpit
- Ritchie FN201 compass mounted in the binnacle
- Emergency tiller stored in cockpit locker
- Balanced rudder is molded fiberglass bonded to a carbon fiber rudder post passing through a removable UHMW bearing and support tube securely laminated to the hull.
AUXILIARY ENGINE
- Volvo Penta 27 hp D1-30 Saildrive. Fresh water-cooled diesel with reduction gear. Electric shut-off
- Single lever engine control
- 12-volt 115 amp alternator.
- 20-gallon custom fuel tank, deck filled, shut-off valve
- Racor fuel filter/water separator
- Raw water intake strainer
- Tuned front and rear cushion type rubber mounts adjustable
- Engine compartment exhaust blower
- Engine compartment light
- Complete engine access through sound and heat insulated removable panels
- Tach, Alarms and hour meter.
KEEL
- A modern fin keel cast in lead with antimony added for strength. Thru-bolted to a reinforced keel sump with stainless steel bolts and bronze nuts
ELECTRICAL SYSTEM
- Three (2- house and one engine start) 12-volt 110 amp group 31 deep cycle marine batteries with sealed 2 position battery switch
- 110V shore power system with GFI protection and 50-foot shore power cord
- Pro Mariner battery charger
- Hot water heater w/heat exchanger; 6 Gal / 23 l
- Master AC/DC marine circuit breaker panels (black), include AC/DC volt and ammeters, and polarity indicator. Space is provided for additional breakers and electronic
gear. - 12V outlets
- 12V fresh water pump
- All wiring is tinned, color coded and meets USCG standards.
VENTILATION AND LIGHT
- 3 Lewmar polished Ocean Series deck hatches with screens
- 4 main cabin fixed port lights of Marguard Lexan
- 2 Custom stainless steel opening ports with screens salon
- Acrylic sliding companionway hatch with fiberglass spray hood solid teak hatch boards and screened hatch boards
DECK HARDWARE
- Self Tacking Headsail
- Selden Furlex TD below deck furler
- End Boom Mainsheet
- Mast collar with provision for halyard and turning block attachments
- Custom stainless steel fore, mid-rail, and aft corner chocks
- (6) ea mooring cleats
- Self-draining foredeck anchor locker with drain and pad eye for anchor rode
- The pulpit, stern rail, and stanchions are custom fabricated of type 316 stainless steel and thru-bolted with backing plates
- Double lifelines of stainless steel cable with port and starboard boarding gates with braced stanchions
- All lifeline terminals and turnbuckles are swaged stainless steel
- Custom profile solid teak toe rails
- Stainless steel companionway handrail and cabin top handrails
WINCHES
- All winches are Lewmar "Ocean Series"
- The mainsheet led to Lewmar 30 CST two-speed
- Main halyard led to Lewmar 30 CST two-speed
- Genoa halyard led to port side 44 CST winch
- Single-Line reefing
- Two 10" chrome winch handles; one 10" chrome lock-in.
COCKPIT
- Sail locker to starboard and port
- Recessed winch handle pockets
- Coamings angled for comfort
- Cup holder on a pedestal
- Two cockpit scuppers to Marelon sea valves
- Boarding ladder.
MAST and BOOM
- Hall CARBON Mast 152C with taper. - Carbon fiber masthead with sheaves for (1) main and (1) spinnaker halyard
- (2) sets aluminum spreaders
- Boom – aluminum Hall 152 section
- Both mast and boom in Matterhorn White Awlgrip finish
- Antal mainsail track system
- Internal main and genoa halyards led aft to cockpit
- Prewired with VHF radio cable
- Internal clew outhaul
- External topping lift.
CHAINPLATES
- Stainless steel, thru-bolted to composite bulkhead structure bonded to the hull. Electrically grounded to keel
STANDING RIGGING
RUNNING RIGGING
- Color-coded lines
- Hall QuickVang led aft to cockpit
ACCOMMODATIONS
- 6'0" standing headroom. (max)
- Forward cabin v- berth. 7’-0” to port, 6’-2” to starboard
- Storage below lids
- Hanging locker to stb
- Main cabin has 6'5" berth to port and stb
- Fwd end of port berth forms chart seat
- Chart table at fwd end of port berth
- Centerline pedestal removable drop leaf table
- Galley with propane stove, stainless steel sink and drawers
- Ice Box, top loading w/ pump out
- All berths provided with 4" foam cushions (main cabin berths have 4 1/2") covered with a durable fabric, zippered for ease of removal
- Quiet Flush fresh water flush MSD
- Lights in cedar lined hanging lockers.
SABRE FEATURES
- Sabre custom tool drawer
- Louvered main cabin locker doors
- Cockpit locker light
- Marelon thru-hulls and sea valves
- Hoses below the waterline are double clamped
- Varnished interior cherry finish with teak & holly sole
- Dovetailed maple drawer boxes
- (1) Automatic electric and (1) manual, bilge pump
Sail Package
- North Mainsail with Antal Luff Slides
- Self-Tacking 90% Jib
- Lazy Jacks with storage back for mainsail
Additional Information
- Hella Cabin Fan in the salon and forward cabin
- Xantrex House Battery Monitor
- Hot & Cold Cockpit Showe
- Tank Watch 4 System for Holding Tank
- Cockpit Cushions for Side Seats Only, Off-White
- MPS/Spinnaker Halyard led aft to stopper
- Raymarine ST60 Knotlog Installed
- Raymarine ST60 Depthsounder Installed
- Tacktick Wind Speed & Direction Installed
- VHF Radio with Masthead Antenna Installed
- VHF RAM near Helm Installed
- Raymarine ST-6002 Plus Below-Deck Autopilot w/Gyro Installed
- Garmin GPS Antenna & Mount at Nav Station, Installed
- Speed puck by Velocitek
- Cruising Spinnaker with Snuffer Sock, Sheets & Turning Blocks
- Carbon whisker pole with mast padeyes
- Spreader Halyard
- Stern-Rail Mount Flag Pole Socket
- Custom Winter Cover & Frame by Custom Covers & Canvas
- Stereo, AM/FM/CD with Cockpit & Salon Speakers
- Cockpit Table
- Removable Swim Ladder
- Hull Dark Blue Imron Paint Fall 2012
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. Hours listed may vary from actual hours due to recent use. Purchaser is encouraged to verify hours prior to purchase. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Email
Facebook
On LinkedIn
To Pinterest
Your Followers