37' Sabre Spirit Daysailers

Specifications

Additional Specs, Equipment and Information:

� 

Draft:�  Deep Keel.................................â�¦â�¦6â��-7â��

Displacement Deep Keel ...��.........9,300 lbs

Ballast Deep Keel .......���.... ��3,740 lbs

Rig Dimensions:

P ..................................����........... .45.50�

E ........................................��.���. 16.55'

I .........................................���.�� ..45.50�

J ......................................����.�.... 12.87'

Total Sail Area (100% FT, sq. ft.) �� 668 sq ft

Cockpit Length ............����............10�-0�

Water Tank (Total gals.) ���..���.30 gals

Holding Tank (gals.) ...............����..30 gals

Batteries .3 @ 110 Amp Hours (2-house, 1-start)

Opening Ports ........................................�.......2

Fixed Ports .......................................................4

Destroyer Wheel�����..���.�.........48"

Auxiliary Engine ���. �����..�...27 Hp

Fuel Tank��.....................����..20 gallons

PHRF Rating (Average) .............�.........87 (est)

Mast Height Above WL (w/o instruments)..55� 3�

Built to NMMA, ABYC, and USCG standards

HULL LAMINATE

- Single unit, hand-laminated E glass, cored with Divinycell closed cell PVC foam

- ISO NPG gelcoat.

- Below waterline chopped strand glass and vinylester resin as a back up for ISO NPG gelcoat.

- Internal deck to hull joint.

- Double boot and single cove stripes.

- Bulkheads, berth faces, shelves and floor stringers laminated to hull providing integral, structural strength.

- Traditional Transom

� 

DECK LAMINATE

- Single unit, hand-laminated fiberglass with Divinycell core for stiffness, and Divinycell HD core in high stress areas.

- The deck is fastened to the hull using stainless steel thru bolts.

- 3M 5200 Polyurethane sealant in the deck to hull joint.

- Propane storage locker in starboard side deck

� 

STEERING SYSTEM

- Edson wheel steering with 48� five spoke Comfort Grip Destroyer wheel, guard and brake.

- Ritchie FN201 compass mounted in binnacle.

- Emergency tiller stored in cockpit locker.

- Balanced rudder is molded fiberglass bonded to a carbon fiber rudder post passing through a removable UHMW bearing and support tube securely laminated to the hull.

� 

AUXILIARY ENGINE

- Volvo Penta 27 hp D1-30 Saildrive. Fresh water-cooled diesel with reduction gear. Electric shut-off.

- Single lever engine control

- 12-volt 115 amp alternator.

- 20 gallon custom fuel tank, deck filled, shut-off valve

- Racor fuel filter/water separator.

- Raw water intake strainer with wrench.

- Tuned front and rear cushion type rubber mounts adjustable

- Engine compartment exhaust blower.

- Engine compartment light.

- Complete engine access through sound and heat insulated removable panels.

- Tach, Alarms and hour meter.

� 

KEEL

A modern fin keel cast in lead with antimony added for strength. Thru-bolted to a reinforced keel sump with stainless steel bolts and bronze nuts.�  Keel has been templated and faired to original design specifications.

� 

ELECTRICAL SYSTEM

- Three (2- house and one engine start) 12-volt 110 amp group 31 deep cycle marine batteries with sealed 2 position battery switch.

- 110V shore power system with GFI protection and 50 foot shorepower cord

- Pro Mariner battery charger

- Hot water heater w/heat exchanger; 6 Gal / 23 l

- Master AC/DC marine circuit breaker panels (black), include AC/DC volt and ammeters, and polarity indicator. Space is provided for additional breakers and electronic

- 12V outlets

- 12v fresh water pump

- All wiring is tinned, color coded and meets USCG standards.

� 

VENTILATION AND LIGHT

- 3 Lewmar polished Ocean Series deck hatches with screens

- 4 main cabin fixed port lights of Marguard Lexan.

- 2 Custom stainless steel opening ports with screens salon

- Acrylic sliding companionway hatch with fiberglass spray hood solid teak hatch boards and screened hatch boards

� 

DECK HARDWARE

- Self Tacking Headsail

- Selden Furlex TD below deck furler.

- End Boom Mainsheet

-Mast collar with provision for halyard and turning block attachments.

- Custom stainless steel fore, mid-rail and aft corner chocks.

- (6) ea mooring cleats

- Self-draining foredeck anchor locker with drain and pad eye for anchor rode.

- Pulpit, stern rail and stanchions are custom fabricated of type 316 stainless steel and thru-bolted with backing plates.

- Double lifelines of stainless steel cable with port and starboard boarding gates with braced stanchions.

- All lifeline terminals and turnbuckles are swaged stainless steel.

- Custom profile solid teak toerails.

- Stainless steel companionway handrail and cabin top hand rails

� 

WINCHES

- All winches are Lewmar "Ocean Series".

- Double Ended Main sheet led aft to Lewmar 46 CST two-speed, Port & Starboard

- Main halyard led to Lewmar 30 CST Electric two-speed.

- Genoa halyard led to port side 44 CST winch.

- Single-Line reefing

- Two 10" chrome winch handles; one 10" chrome lock-in.

� 

COCKPIT

- Sail locker to starboard and port

- Recessed winch handle pockets.

- Coamings angled for comfort.

- Cup holder on pedestal.

- Two cockpit scuppers to Marelon sea valves.

- Boarding ladder.

� 

MAST and BOOM

-Hall CARBON Mast 152C with taper. - Carbon fiber masthead with sheaves for (1) main and (1) spinnaker halyard

- (2) sets aluminum spreaders

- Boom ââ?¬â?? aluminum Hall 152 section

- Both mast and boom in Matterhorn White Awlgrip finish

- Antal mainsail track system

- Internal main and genoa halyards led aft to cockpit.

- Prewired with VHF radio cable.

- Internal clew outhaul.

- External topping lift.

� 

CHAINPLATES

- Stainless steel, thru-bolted to composite bulkhead structure bonded to the hull. Electrically grounded to keel

� 

STANDING RIGGING:

- Continuous Rod Rigging.

� 

RUNNING RIGGING

- Color-coded lines

- Hall QuickVang led aft to cockpit

� 

- 6'0" standing headroom. (max)

- Forward cabin v- berth. 7�-0� to port, 6�-2� to stb. Storage below lids.

- Hanging locker to stb.

- Main cabin has 6'5" berth to port and stb.

- Fwd end of port berth forms chart seat.

- Chart table at fwd end of port berth

- Centerline pedestal removable drop leaf table

- Galley with propane stove, stainless steel sink and drawers

- Ice Box, top loading w/ pump out

- All berths provided with 4" foam cushions (main cabin berths have 4 1/2") covered with a durable fabric, zippered for ease of removal.

- Quiet Flush fresh water flush MSD.

- Lights in cedar lined hanging lockers.

� 

SABRE FEATURES

- Sabre custom tool drawer.

- Type A: B: C fire extinguishers.

- Louvered main cabin locker doors.

- Cockpit locker light.

- Marelon thru-hulls and sea valves.

- Hoses below waterline are double clamped.

- Ash hull ceilings.

- Varnished interior cherry finish with teak & holly sole.

- (2) coats sealer only on sole. Final finish TBD by dealer/client

- Dovetailed maple drawer boxes.

- (1) Automatic electric and (1) manual, bilge pump.

� 

Selections:

HULL COLOR� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �  Flag Blue � � � � �  � 

COVE STRIPE� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �  Gold� � � � � � � � � � � � � � � 

BOOT TOP COLOR� � � � � � � � � � � � � � � � � � � � � � �  Sabre White� � � � � � � � � � � � � 

DECK COLOR� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �  Sabre White� � � � � � � � � � � � � 

ANTI SKID COLOR� � � � � � � � � � � � � � � � � � � � � � � �  Beige� � � � � � � � � � � � � 

KEEL� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �  Fin� � � � � � � � � � � � � � � � � 

INTERIOR WOOD � � � � � � � � � � � � � � � � � � � � � � � � �  Varnished Cherry� � � � � � � � � � � � � � � � 

UPHOLSTERY SALON� � � � � � � � � � � � � � � � �  Concept Navy� � � � � � � � � �  � � � � � � � � � � � � � � � � � � � � � � � 

UPHOLSTERY FORE� � � � � � � � � � � � � � � � � � � �  Concept Navy� � � � � � � � � � � � � � � � � � � � � � 

CORIAN HEAD� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �  Sahara

CORIAN GALLEY� � � � � � � � � � � � � � � � � � � � � � � � � � �  Sahara

BOTTOM� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �  VC 17 Original� � � � � � � � � 

Mainsails

2008 Pentex Triradial

2011 GPL Carbon Triradial- ANTAL Slides

� 

Jibs-

RF Jib w/UV Cover Quantum�  2018

70%- #4 -Cross Cut Dacron Heavy Weather Jib- 2008

90% Self Tacking Roller Furling Jib- Triradial Pentex -2008

90% Self Tacking Jib-Triradial�  Pentex -2008

93% Jib ââ?¬â?? GPL Carbon Triradial - 2012

105% Triradial ââ?¬Å?Lapperââ?¬ï¿½- Pentex 2009

106% LT/AP Lapper- FLEX 11(Technora black) - 2013

155% AP Genoa ââ?¬â?? Triradial Pentex 2008

155% LT/AP Genoa- GPL Carbon-Triradial ââ?¬â?? 2011

� 

Spinnakers-

180% AP Triradial ââ?¬â?? Formulon 75( .75oz)- 2011

180% Asymetrical Formulon 95 (1.5oz) 2009 w/Snuffer

180% AP Triradial ââ?¬â?? AIRX 600- 2008

� 

� 

Electronics:

Raymarine ST60 Knotlog Installed in Pod at Helm

Raymarine ST60 Depthsounder Installed at Helm

Raymarine ST60 Windmachine Installed at Helm

Velocitek Prostart installed at Helm (GPS Tactical Compass, SOG, Timer)

Tacktick Race Master System on Mast w/Bracket

VHF Radio with Masthead Antenna

VHF Ram Mic at Helm

Garmin GPSmap 440 at Nav Station

RayMarine Maxi Display at Nav Station

Sony AM/FM/CD Stereo w/Aux Input at Nav Station

� 

� 

Additional Equipment and Services:

Custom Made Cockpit Cushions

Stereo and four speakers� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �  � � � � � � � � � �  � � � � � � � � � � � � � � � � � � � � � � �  � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 

MPS/Spinnaker Halyard led aft to stopper� � � � � � � � � � � � � � � � � � � � �  � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 

Docking Package

Anchor Package

Safety Package

Windex on Masthead

Two Additional Coats of Sealer on Cabin Sole

VC 17 Anti-Fouling Bottom Paint over Prepped Hull & Foils� � � � � � � � � � � � � � � � � � � � � � � � � � � 

Custom-Made Painted Steel Cradle with 8 Adjustable Uprights

� � � � � � � � � � �