Equipment
- Polished bronze deck hardware includes:
- Two LEWMAR #16 two speed genoa sheet winches.
- Four 7" x 12" and four 4" x 7" opening ports with screens.
- Two 8" stern mooring cleats with chocks.
- Two 10" bow mooring cleats with hawse pipes.
- Two 8" open spring cleats amidships. -
- All cleats, winches, turning blocks, pulpits and stanchions are installed with backing plates and caulked both sides. -
- BOMAR forward hatch. -
- Laminated vertical grain fir bowsprit with clear epoxy finish, teak platform and bronze eye band. Stainless steel double rail bow and stern pulpits with 27" high stanchions, and double lifelines. - Stainless steel swim ladder with teak treads. -
- Stainless steel bow roller assembly with two anchor rollers. -
- Outboard genoa track and cars. -
- Bow chain locker with anchor deck pipe. -
- Stern chain locker, anchor roller and deck pipe. -
- Deep bulwarks -
- Four teak loop handrails. -
- Fiberglass sliding hatch and fiberglass seahood. -
- Propane storage tank locker with hatch in cockpit. -
- Ball bearing mainsheet traveler.
Electronics - B&G Network wind direction/wind speed
- B&G Network depth
- B&G Network speed/log
- B&G Network repeater installed in cabin
- B&G color chart plotter
- ICom M 502 VHF
- Raymarine ST400 Tiller Pilot
- Weems and Plath Upgraded Bulkhead Mount Compass
Electrical - DC control panel w- six circuit breakers and battery condition meter.
- Copper tinned DC wiring throughout. -
- 2 marine batteries (approx. 66 amps each). -
- Four position battery switch. -
- All required navigation lights. -
- Dome lights and reading lights. -
- RG-8U coaxial antenna cable lead from masthead to navigation station
Accommodations - White Formica cabin house sides.
- Hand rubbed oiled teak interior. -
- 6' headroom with teak and holly sole throughout cabin area. -
- All hatches and hatch openings in sole banded in solid teak. -
- White matte finish below counter height, teak cabinetry above. -
- Spun polyester wrapped foam cushions -
- Zippered vinyl headliner for access to deck hardware & wiring.
- Forward - 6' 8" long and 81" wide double "V" berth with shelves on both sides & storage below.
- Two teak drawers under V-berth.
- Main Salon - 6' 6" long settee berths, port and starboard with storage bins. -
- Teak storage shelf with removable fiddle, both sides. -
- Slide out dining table stows under V-berth. -
- Enclosed head w-teak shower seat, storage lockers & separate wet hanging locker.
- Shower has teak grate & sump pump. -
- Spacious hanging locker to starboard.
- Gimbaled stainless steel, two burner propane stove w- oven. -
- Stainless steel safety bar-towel rack. -
- Large ice box w- poured foam insulation and w- hand pump out to sink. -
- Polished stainless steel double sink. -
- Food and dish storage lockers and drawers.
Hull & Deck - Hand laminated hull and deck with molded-in gelcoat color.
- Deck is balsa cored. Plywood is substituted in high load areas. -
- Deck has molded-in nonskid pattern. -
- Deck to hull connection: mating hull and deck flanges bedded in polyurethane adhesive and fastened with stainless steel thru-bolts. -
- Stainless steel chainplates and backup plates caulked both sides and thru-bolted to hull. -
- Solid teak rubstrake.
- Traditional bowsprit needs partial repair
Mast & Rigging - Harken RF System
- Aluminum spar with two-part polyurethane finish. -
- LEWMAR #8 jib halyard winch. -
- LEWMAR #8 main halyard winch. -
- 1 x 19 stainless steel standing rigging. -
- Forged bronze open body turnbuckles. -
- Dacron braid running rigging. -
- Stainless steel tabernacle style mast step.
Plumbing - 40 gallon (151 Itr.) water tank. -
- Bronze thru-hull fittings with UL approved bronze seacocks below waterline and bronze ball valves above. -
- Camping style head (original head was removed. Boat has holding tank, Y valve and pump out) Add the toilet and your back to original
- All thru-hull hose connections are double clamped
Rig and Sails - RF Genoa with Green suncover
- Full Batten Mainsail
- Cruising Spinnaker
IJPE : 361.00 sq ft
I : 34.00 ft
J : 12.25 ft
P : 28.25 ft
E : 10.83 ftDescriptionThe Dana 24 is conceived for cruising and designed for performance. She is built to the standards of excellence that have always set Pacific Seacraft yachts apart. Quality is evident in every detail, from carefully fitted teak joinery to husky bronze fittings and impeccable mechanical installations. Crealock is well-known for cruising boats with exceptional performance, and Dana is the culmination of all he has learned. Sophisticated hull design, high ballast ratio and efficient sail plan provide stability and power for the kind of windward performance that is so often lacking in other pocket cruisers. Her beautifully traditional hull encloses an extraordinarily spacious and functional interior that is innovative and inviting. Her 6-foot 1-inch headroom, fully enclosed head, honeymoon berth and congenial main salon are but a few of her charms. A long list of standard features includes two-cylinder diesel power, winches, sails and full galley.
DisclaimerThe Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
customContactInformationCall for more information or a Courtesy Showing.
Available for Co Brokerage on a 50/50 basis
Bill Wright 727-440-2907
bill.wright@masseyyacht.com
Email
Facebook
On LinkedIn
To Pinterest
Your Followers