MORE PICTURES COMING SOON!
"I Believe" is Truly a Beautiful Vessel both inside and out and has been maintained by a Knowledgeable and Meticulous owner !! She has been continually upgraded since she was purchased in 2017 from an owner who had the same HIGH STANDARDS as her current owner.
Key Features on this Cabo Rico 38 Cutter:
- Bow Thruster, with Remote (New gear leg 2023; New Prop 2023, have spare)
- 2019 Dometic 12000 BTU AC Condenser & Evaporator
- 2015 Magnum Energy Inverter/Charger
- Extensive Electronics Upgrades in 2021
- Air Breeze Wind Generator
- Two Kyocera 120 Watt Solar Panels
- 2019 water pump and controller on the CruiseAir Air Conditioner
- Custom Dinghy Davits and Motor Lift
- All the Teak is in Excellent Condition and has covers for all..
- Well Maintained Universal M50 Engine, with FULL Maintenance Records and NEW 2015 Transmission, Heat Exchanger and Exhaust Riser (Complete service 2017)
- Sails have been upgraded, including a Like New Cruising Spinnaker with sock (Main serviced - North Sails)
There is much more check out Full Specifications for all the details......
Here is just some of what the manufacture had to say about these Great Vessels:
"At Cabo Rico we strive to create sailing vessels for owners who take pride in Excellence. Each vessel is built to the most exacting standards of construction, details and finish. The superior execution of this beautiful Crealock design, with a clipper bow sweeping gracefully into her jaunty sheer, has created a contemporary yacht with is, at the same time, classic. Many years of experience are embodied in this most sensible deck layout. Its many features, combined with the best fittings and equipment, reflect Cabo Rico's commitment to quality........."
ACCOMODATIONS
The master stateroom is forward, with an offset double to starboard. This bed has ample dimensions (7' 5" along the starboard side, 4' 6" along the head, 5' 2" wide mid- section) and has a custom foam topper. Additional features include: vanity and dressing seat, locker, drawers, shelves, other storage, two opening ports, and overhead hatch. This stateroom is light and airy, and very accommodating.
The head compartment is next aft to starboard. It has a sink, storage space, and marine toilet with macerator, separate stall shower with teak grate, ceramic tile sole, medicine cabinet, and linen locker.
The large salon is next aft with straight settee/berth to port and an L-shaped settee/berth that converts into a double, to starboard. Storage is found below and behind the settees. Solid teak shelves and cabinets are found outboard and above the settees. The fold out, teak dining table folds up against the bulkhead, out of the way until needed. When folded up it conceals a sizable storage cabinet for glasses and dishware. The 22" Sony flat screen TV is a 2020, the Blu-Ray DVD is a 2020 as well as the Fusion iP700i Stereo.
The navigation station is to starboard at the base of the companionway, facing outboard, and has a swing out stool. This area features a wet locker, good storage space, large chart table, and a good array of navigational equipment. This is also where the freezer is located.
The U-shaped galley is opposite the navigation station to port, also at the base of the companionway. If you are the cook, you'll appreciate the good storage space, lot's of countertop space, the double S/S sinks, that are mounted near the centerline for good drainage on either tack and the safety that the U-shape provides at sea.
Solid, varnished teak joinery is found throughout this fine yacht. Teak and holly sole is in fine condition. - Dometic Air conditioning with reverse cycle heat, 2019 Control Panel and water pump
- Technautics 12 volt Refrigerator (2017 control head)
- Separate Technautics 12 volt Freezer
GALLEY
- Stainless Steel double sinks
- Mixing faucet
- Hot & cold pressure water system
- Manual fresh water pump
- Storage for galley-ware and dry goods
- Gimbaled Tasco three burner propane stove, oven, and broiler 2007
- Microwave oven
- 12v Technautics Cool Blue compressor w/holding plate refrigeration, Danfoss compressor, March 2016 (2017 control head 7 Thermostat)(2023- new Control unit)
- 12v Technautics Cool Blue compressor w/holding plate freezer (New Fan 2017)
ELECTRONIC & NAVIGATION
Extensive upgrade in 2020 with addition of NEW trim panel and Navigation Station
- 2020 Garmin 1242xsv touch w/Nav Card at Helm
- 2023 Chip US, Caribbean, S America
- 2022 Garmin Phantom 18 Radar Dome
- 2020 Garmin 742 Plus GPS/Plotter (nav station)
- VHF Standard Matrix AIS GX2150 with AIS connected to the Garmin 1242, RAM Mic at helm and NEW 2014 Antenna
- 2014 B&G Triton Speed, Depth and Wind Digital Displays (Easy to read!)
- 2019 New B&G Anemometer
- 2019 Digital Transducer Airmar smart
- Questus self-leveling radar mount.
- Autohelm Raymarine EV-1 Sensor Core for AutoPilot 2021
- Autohelm Raymarine ACU-400 AutoPilot 2021
- Rebuilt 2017 linear drive unit Type 2
- 2022 Raymarine P70S Autopilot Display
- Raymarine 700 AIS Transponder� 2018
- 2019 Raymarine SmartPilot X30 rebuilt
- Pedestal mount Ritchie compass. Adjusted 02/16/18
- 2019 Fusion MS-UD750 iPod Interface Stereo/Fusion Remote/Bluetooth
- 2018 TV
- 2014 Two Exterior MA800 Speakers
- Interior Speakers - 4
ELECTRICAL
The Electrical systems are VERY neat and tidy, and well-marked, a Cabo Rico Standard. - NEW 2022 4 AGM 105AH Batteries (three house, one engine)
- Added bus bars, 2014
- Balmar 100 amp Alternator
- 2014 Magnum Energy Inverter/Charger ME2512 2500W
- 2021 Air Breeze Wind Turbine and controller?rebuilt by Airbreeze
- 2 Kyocera 120W Solar Panels, Model KC120-1
- 2014 Blue Sky 3000i Solar Controller
- 30 Amp shore power connection.
- Shore power cord.
- 12v/110v ships systems.
- 2014 All nav lamps switched to LED
- Changed both Refrigerator Lights to LED
- Eight LED Dome Lights - Most are Red/White night vision saving
- 2014 LED Red/White Cockpit Tube Light
- Three Chrome LED reading lights
MECHANICAL
- Universal M-50 44 HP diesel engine with 2742 hours, with Full Detailed Service Records since 2000
- Numerous spare parts for Engine
- 2015 Dampener Plate, Heat Exchanger, Exhaust Riser
- 2013 Vetus Bow Thruster BOW55 with remote
- Racor fuel filters for Generator and Engine
- Reverso oil change pump system for both Generator and Engine
- Fuel & water tanks baffled to reduce "sloshing"
- Water heater, 110V and heat exchanger
- VARIPROP 4 Blade Bronze Feathering 17x9 Prop
- 2008 1 1/4" S/S shaft
- 2015 ZF-15 Transmission
- Jabsco sensor max 4.5 gpm water pump
- Jabsco Macerator Pump
- 2017 Bilge Pump Jabsco 34600 Series Bilge Pump
- Dometic Reverse Cycle Heat and Air, NEW Condenser & Evaporator 2019 New Control Head and water pump
- Manual Bilge Pump
SAILS & RIGGING
S/V I Believe is a single spreader, keel stepped rig with anodized aluminum mast and boom. The reefing lines and main halyard are led aft to the cockpit. All of the sails are by North Sails and in Very Good Condition. Both headsails are on roller furling and the main has a Harken Carr &� Slide system plus Dutchman.
- Full batten mainsail
- 2009 Harken Carr & Slide Sail System.� Serviced 2020
- Replaced main sheave 2017
- Dutchman flaking system - Serviced 2020
- 130% genoa w/rope luff pad, new 2002, re-stitched 2014, Serviced 2020
- Schaefer 3100 roller furling, 2007
- Staysail w/pedestal mount boom, 2006.
- Furling for Staysail, 2011 ? Serviced 2020
- Spinnaker with Snuffer - Excellent Condition
- Asymmetric Spinnaker (Line New)
- Sheet stoppers on cabin top
- 1x19 S/S wire rigging
- Internal halyards, main & genoa
- Upgraded Anderson 46ST primary winches in 2002
- All other winches are Barient Self Tailing/ Serviced 2021
- Stainless Steel Mast Pulpits
- Main Halyard replaced 2017
- Standing Rigging inspected ? 2017
- Harken triple block (6/18/2019) port side
COVERS
- Bimini Top - Dodger and Side Curtains (new Dec 2018)
- Lazy jacks
- Mainsail cover
DECK & HULL
- Full Keel with protected prop and rudder
- Lighthouse Stainless Steel electric windlass (1501)
- A140 spade anchor w/300' 3/8 chain
- 35# CQR w/150' 5/16 chain.
- Dual anchor rollers.
- Bimini, Dodger and connector
- Full cockpit enclosure
- Custom Dinghy Davits
- Dinghy Lifting Block and Tackle
- SS Outboard Lift
- Edson Outboard Engine Rail Mount
- 2016 Plexiglas and seals for the three Stainless Steel Hatches all with screens
- Stainless Steel Portlights with screens
- Companionway Screen
- C-Cushions Closed Cell Foam Cockpit cushions
- Custom Teak cockpit table, with cover
- Helm seat with cushion.
- Raw water wash-down system
- Very well varnished exterior teak.
- Cap & grab-rail covers
- Varnished dorade boxes w/Stainless Steel cowl vents and protectors (3)
- Sunbrella Covers for the Dorade boxes.
- Transom mounted boarding ladder.
- Cockpit shower.
- Bottom Job Sanded and Painted - 2022
COCKPIT AREA
- Custom Cockpit Table
- Cockpit shower
- Teak cockpit - Grate
- Cockpit cushions
- Outboard engine brackets
- Davits
FOLLOWING ITEMS NOT PART OF LISTING BUT AVAILABLE TO PURCHASE FROM SELLER
- 2017 Six (6) person life raft� serviced 06/2022
- 2017 EPIRBÃ?Â
- 2019 Garmin InReach
- Espar cabin heater, model D3LC.
- Icom SSB 710Ã?Â
- Tools
- Personal Items
Email
Facebook
On LinkedIn
To Pinterest
Your Followers