Engines
Total Power: 27 hp
Tanks
Fresh Water: 35 gals x 2=70 gals
Accommodations
Starting forward you have a large v-berth with a shelve above the berth on the port side and storage underneath. Aft of the berth there are two hanging lockers, one to port the other to starboard. This cabin is separated by an access door to the salon.
The salon features settee/berths to starboard and port with lift up pilot berths on both sides. There is a large centerline table with drop leafs and bottle storage. There is a nice stainless steel handrail on the ceiling for moving around the cabin while underway.
The galley is aft of the salon to port and the nav station is to starboard. The chart table is forward facing with storage under the lid. The instruments and the breaker panel are located on the outboard side.
The aft cabin is located on the port side just aft of the galley. This cabin has a large double berth, hanging locker, and changing seat.
The head is located on the straboard side aft of the nav station. The head has an integral second molding for easy maintenance with integral shower tray, sink with vanity and access to valves and toilet support shelf. The cockpit storage can also be accessed through the head.
"Sapphire" features a teak and holly cabin sole, a cherry interior finish with Sunbrella cushions in "blue". Her opening hatches and her opening ports provide excellent light and ventilation.
Galley
A large L-Shaped galley is located on the port side.
- Double s/s sink with fresh water foot pump
- Hot & cold pressure water, manual water
- Full length locker outboard of galley coutertops
- Top loading 12v Seafrost refrigeration
- Force 10 2-burner gimballed propane stove with oven
- Storage under sink with shelf and space for trash bin
Electrical"Sapphire" has both 12 Volt DC and 110 Volt AC systems wired to breaker panels with individual breakers and or fuses.
- 12 VOLT DC
- (2) AGM 8A31 DT Batteries (House)
- (1) AGM 8A31 DT Battery (Engine Start)
- Three Position Battery switch
- 100 amp altenator
- Navigation lights
- Masthead tri-color light
- 110 VOLT AC
- Matrix digital voltmeter
- 30 amp Shore power connection
- Shore power chord
- 110 volt outlets are GFCI protected
- Promariner 30-3 amp charger
Electronics- VHF radio
- B&G 1000 H series multi display (nav station)
- Raymarine ST 5000+ auto pilot
- Raymarine RL 70 C radar/GPS plotter
- B&G H1000 speed, log, depth, wind (on sea hood)
- B&G 3F Displays (on mast)
- Ritchie Compass (pedestal)
- Stereo/CD player with inside & outside speakers
Mechanical- Yanmar 3 GM 30 SD
- Sail Drive SD 20
- Martec 16" Folding Prop
- 54" Edson Diamond series Wheel steering
- Emergency Tiller
- Racor R20 P fuel filter
- Centek muffler
- Water Strainer Vetus type
- Water temperature gauges
- Water temperature, oil pressure, amp/volt alarms
- Fire extinguisher
Hull & Deck"Saphire" has a 'flag blue' awlgrip hull and a silver boot-stripe. She features gray two-tone decks.
- Moulded stern platform w/removable swimming ladder
- Moulded spray shield w/dodger storage and companionway instrument pod
- GRP moulded structural bulkhead bonded to hull and deck
- All intermediate bulkheads glassed to hull and deck for stiffness
- Heavy duty fibreglass floor stringer grid infused into hull, including mast and chain plate structure
- Balanced spade rudder construction using biaxal and unidirectional glass and large diameter anodised aluminum stock mounted in JP3 self-aligining bearings
- Retractable carbon fibre bowsprit (extendible to 5.5' (1.70m) beyond the bow) with seal
- Nautos solid Boomvang w/cascade purchase systme
- (4) Locking winch handles
- (2) Harken 46 STA (self-tailing) primary winches
- (2) Harken 40 STA (self-tailing) halyard winches
- Mainsheet purchase on Hraken ball bearing blocks and fine tune
- Harken adjustable mainsheet traveller with 4:1 purchase led to a cleat on both sides
- Harken ball bearing genoa and jib tracks with 4:1 car controls led to cleats by coach roof
- Harken foot blocks for genoa sheets
- Harken spinnaker sheet blocks on U-bolts
- Harken block on pad-eye at bowsprit end
- (5) halyard/reef turning blocks
- Halyards lead aft through 2 quadruple organizers and (4) spinlock XT stoppers on each side of companionway
- (2)bow mooring cleats
- (2) stern mooring cleats
- Custom s/s stern plate w/tack fitting, removable anchor roller
- Foredeck opening hatch (500x500) with vent
- Opening hatch (450x320) over main saloon
- (2) opening ports (304x155) for aft cabin and toilet compartment
- (1) opening port (350x170) in cockpit (aft cabin)
- (2) s/s handrails on coach roof
- S/S pushpit and pulpit
- Double s/s lifelines, 8 stainless stanchions, 4 with reinforcing leg
ConstructionInfusion is a method of introducing catalyzed resin into a pre-layout of dry material under vacuum. Dry fibers are placed in mold, with core (Balsa or Foam). Which is then covered by a special flow cloth and a flexible vacuum bag, a high pressure vacuum is then applied and a series of resin tubes draw the catalyzed resin into the part.
The result is a high quality method of production which produces results repeatedly and consistently. It allows dimensional control and regularity of weight and unlike a pre-impregnation process, infusion does not require special materials storage conditions, nor an oven.
An economic and reproducible process, direct positioning of dry fibers is easier and more precise than in traditional hand lay-up processes. It also allows controlled placement of fiber direction, as it is not impeded by gel times etc� The perfect control of the quantity of resin infused and the dry placement cloth make it possible to obtain extremely homogeneous finished parts.
The weight variation of the piece is very small (1 to 2% only), a performance which is impossible to achieve with hand lamination.
Sails & RiggingSparcraft tapered aluminum mast with double airfoil spreaders. Sparcraft boom with 8:1 internal outhaul puchase system, mainsail reef line sheaves and mainsheet and rigid vang tangs.
- SAILS
- UK Tape drive main 2003
- UK Tape drive 140% genoa 2003
- UK Tape drive 153% genoa 2003
- UK class spinnaker 2003
- UK jumbo spinnaker 2003
- Rigging
- Continuous Rod rigging Navtec Nitronic 50
- Sailtec hydraulic backstay adjuster
- Harken jib fuler system 1
- Hall Quickvang Mechanical
- Spectra main halyard
- Spectra jib halyard
- (2) pre-streched polyester spinnaker halyards
- (2) Spinnaker sheets
- (1) Tack line
- (2) jib sheets
- (1) Main sheet with fine tune
- (1) Bow sprit control line
- (2) Reef lines
Additional- Dodger sumbrella "Silver"
- Mainsail cover
- Cockpit table
- Cockpit Shower
- (5) dock lines
- (4) fenders
- Fairclough Winter cover
- Fortress FX 16 Anchor with rode
- Radar Reflector
- Flares & horn
- Boat hook
DisclaimerThe Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Email
Facebook
On LinkedIn
To Pinterest
Your Followers