36' Sabre 362 Cruisers

Accommodations

Beautifully maintained 2 staterooms� varnished full cherry interior� with teak and holly sole accommodates up to seven when necessary.�  Ample natural light and ventilation via 4 large fixed ports, 6 opening ports, 2 large hatches, and 2 dorade vents.�  When season extending heat is desired there is Espar diesel cabin heat fitted, or simply use it to take the chill off on a damp morning.�  Artificial light is equally well thought out with swivel-style reading lamps at each berth/settee as well as several overhead lamps in working spaces.� 

Starting forward the Forward Stateroom features an ample V-berth with bin stowage and drawers underneath. Above the berth, there are ash ceilings and shelves. Aft to port is a small bureau with drawers and a hanging locker while opposite to starboard is a dressing seat with stowage under and lockers behind and a small sink & counter with H&C pressure water.

Next aft is the Main Salon featuring an L-settee to starboard and straight settee to port. The L settee can be made out into a comfortable double berth. There is stowage under the settees, behind the seat backs, and in lockers and shelves above. A large teak table with folding leaves will comfortably seat 6-8 people while dining and yet conveniently folds up to the main bulkhead when not required.

Next aft to starboard is the Galley. The large L-shaped galley features double polished Scandvik stainless steel sinks with H&C pressure water, manual fresh water, ample custom Corian counters and excellent stowage space in 4 drawers and numerous lockers, a large refrigerator freezer with top access, and gimballed two burner� Propane stove with oven.

Opposite to port is the Nav. Station and Head with Stall Shower. The Navigation Station is aft facing and includes all of the vessel's navigation electronics as well as her electrical distribution system. There is chart stowage under the flip-up chart table top and three drawers. Furuno GPS not in service

The Head is ample providing plenty of elbow room and features a stall shower with a seat, separate sump and sump pump aft, good counter and stowage space, stainless steel sink with H&C pressure water.

Aft of the Galley is the Aft Stateroom featuring a large double berth with bin-type stowage under. Above the berth the hull is sheathed with ash ceilings and a teak stowage shelf, just forward and outboard is a small bureau and a hanging locker.

The interior, like the rest of this Sabre 362, has been fastidiously maintained and shows much newer than her age.

• Espar diesel cabin heat
• Xintex electric propane solenoid, detector, and alarm
• Panasonic AM/FM/CD stereo, speakers in Salon
• Courtesy lights

Aluminum keel stepped mast by Hall Spars with double swept back spreaders, finished in white Awlgrip with 1X19 stainless steel wire rigging.�  Mast height with antennas etc. is 54'-6"

• Mobri Radar Reflector
• Lewmar 48CST primaries
• Lewmar 30CST Main Halyard
• Lewmar 30CST Main Sheet, and reefing lines
• Lewmar 24 Genoa Halyard
• Lewmar 24 Spinnaker Halyard Ã? (no other spinnaker rigging)
• Harken Roller Ffurling
• Lazy Jacks
• Split backstay
• Doyle Mainsail 2 reef points in Doyle Stack pack original, good condition
• 135% RF Genoa Bohndell excellent condition 2009

Wired for both 12VDC and 110VAC systems. The vessel distribution system is at the Nav station with both panels having breakers.

• 12VDC
• Volt & amp meters
• 2 group 31 house batteries
• 1 group 24 engine start battery
• 80Ã? amp alternator

� 

• 110VAC
• 6 Outlets
• 50' 30amp shore power cord
• Shore power inlet in cockpit
• Water heater (also eng. supplied)

This Sabre 362 is fully fitted for coastal cruising.

Nav. Station

• Furuno - Not in service
• New Garmin GPS helm mounted - GPSmap XSV
• Garmin Radar
• Icom M56 VHF with AIS
• Standard Horizon handheld VHFÃ? 
• VHF remote mike in cockpit.Ã? 
• Two stereo speakers in the salon
• Panasonic am/fm CD player

� 

Cockpit

• Garmin 2006C color GPS/Plotter 2004
• Autohelm 6000 linear drive autopilot

This Sabre 362 is fitted with the optional higher HP Yanmar� 3JH2E turning a� two blade Max Prop. through a Kanzaki 2.5:1 reduction gear on an 1-1/8" Aquamet shaft.

Engine space with light, excellent access from all sides.

• PSS dripless shaft seal
• 2 Blade Max Pro prop
• Racor fuel filter
• Oil pressure, water temp, charging indicator and RPM Gauges
• Fuel gauge at nav. station
• Holding tank fitted with Y valve
• Electric macerator pump
• Electric bilge pump
• Manual bilge pump
• Seafrost engine driven refrigeration

Single unit solid fiberglass bottom, balsa cored topsides, hand laminated using alternate layers of mat and biaxial roving with vinylester resin in the exterior laminate for superior osmotic blistering resistence.�  White original gel coat in excellent condition with blue cove stripe and custom white/blue/white/blue boot top.�  The bottom is finished with ablative blue anti fouling.�  Partially cored fiberglass� deck molded in a single unit with two tone molded in non-skid, moon dust on white.�  Teak toes rails and grab rails are finished with Cetol and have been kept well sanded and free of build up.

� 

• Maxwell Nilsson 800 electric anchor windlass
• Salt water wash down forward
• 35 lb CQR with app 175' chain & rode
• Fortress FX 23 with app. 150' chain & rode
• Swim/boarding ladder at transom
• Dodger stainlessÃ? frame with grab rail
• Teak cockpit table
• Cockpit cushions
• Edson wheel steering
• Double bow and stern rails
• Stainless steel stanchions with double life lines and gates P&S
• Docking pkg: 4 docklines, 2 fenders
• Safety equip: 8 Type II PFDs, 3 fire ext., Lifesling, Horn
• Emergency tiller

A two-owner boat, this Sabre 362 enjoyed wonderful care along with light use.�  For those seeking a contemporary performance cruising yacht, she should be seriously considered.

� A quick note on centerboard boats, Often less knowledgeable buyers will rule out a boat because it has a centerboard (one more thing to maintain, though taken to an extreme that would leave you with a boat equipped with a hand pump and a bucket for amenities!).�  That said, a centerboard provides for a wide range of balance control of the yacht.�  Often when sailing the helm becomes heavy even with the traveler eased, but is not yet overpowered, simply raising the centerboard 5% moves the center of lateral resistance aft quite a bit thereby balancing the helm and leaving the boat powered up while the wing keel or fin keel boat only has the option of reefing while you sail by!�  The centerboard is only necessary when sailing reasonably close to hard on the wind so whetted surface is reduced at all other times.

• Folding cockpit table
• Folding salon table
• New Thurston dodger with leather hand grips

As reported in Spin Sheet magazine:

The construction of the 362â��s hull is hand-laminated fiberglass with balsa wood coring. The decks, cockpit, and cabin are hand laminated as a single unit with fiberglass, balsa, and marine-grade plywood. The hull and deck are joined at an internal flange with adhesive sealants and bolts on six-inch centers.� 

The quality of Sabre�s construction is first-rate throughout, but what appeals to me most is that Sabre remains one of the few production boatbuilders that minimizes its use of fiberglass liners and modules. Instead, bulkheads and joiner work are attached with fiberglass tabs directly to the hull; thus, becoming an integral part of the structure. When properly done, both methods of the construction result in strong boats, but the less a builder relies on fiberglass liners and pans, the better the access for inspection, repairs, and service.

The boat comes with a full "Miller" cover and frame. Shown in photos

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Contact Tim Kohl for showings

tim@ecys.com

203.233.9709