30' Tartan 30 Racers and Cruisers

Accommodations

Sleeping accommodations for six.  Vee berth forward, that can be enclosed by a hinged door, the head is next aft on the port side with a hanging locker opposite.  The main cabin features the standard starboard side galley arrangement.  The engine is located in the main cabin just aft of the main bulkhead. The port berth in the main cabin also converts to a double berth.  There are two quarter berths aft. 

Starboard side galley arrangement is close to the companionway and includes a very large uncluttered countertop surface.  The ice box is uniquely configured to allow access by a hinged door from the galley or outside from the cockpit. Stainless steel sink with lockers outboard.  The chart table located immediately aft of the galley may also function as additional counter space.  2 burner Kenyon Alcohol stove.

Keel stepped aluminum mast.  New standing rigging, new running rigging, new electrical wiring, new mast lights, steaming deck, tri-color.

Sail Inventory

• Dacron Mainsail, Shore
• #1 Genoa, Shore ('95-96 Vintage) good condition
• #2 Genoa, Sobstad
• #3 NEW 2010 by VT Sailing Partners
• Asym Spinnaker, excellent condition

- Harken Roller furler included, but all sails presently configured for hank on style. 

- Mainsheet Traveller

- Spinnaker gear & Pole

• Danforth anchor w/30' chain & 200' 5/8" nylon (new)
• 4 fenders
• 4 docklines
• 6 lifejackets
• Swim ladder
• Custom Dodger
• awning
• Custom Steel Cradle

1. Repair leaking chainplates - re glass deck where they passed through - got rid of old wet core - layed up new solid fiberglass in place.
2. Repaired main bulkhead, removed wet area, and replaced with new plywood. Sistered with new plywood (painted white) and through bolted - very strong and well done.
3. Installed new Stainless chainplates -longer than original and with additional fasteners.
4. Welded on larger cover plate to chainplate - bedded everything - thru bolted cover plates to deck.
5. Replace port lights with new material, re-bed.
6. Built new hatch boards, varnish finish
7. Built new Lazarette lids, varnish finish.
8. Scraped off old bottom paint to gelcoat, applied Interlux barrier coat 2000 - Interlux bottomkote on top of that.
9. Replaced all the thru-hulls with proper seacocks and new hose.
10. Installed new head and hoses.
11. MAST  A) New Standing Rigging with STA-LOK Terminals B) New Running Rigging with wire to rope spliced halyards. C) New internal mast wiring and coax cable D) New lights - Steaming, Deck, and Tri-Color lights, E) New VHF Antenna and Windex.
12. New Custom dodger, California style with all windows removable and custom welded on handle(s).
13. New Zip on awning.
14. New #3 Working Jib (2010 by VT Sailing Partners).
15. New Interior Cushions and New cockpit cushions all with new foam.
16. New Instruments (Raymarine) Depth and Knot Log.
17. Custom winter storage cover.
18. Custom Steel Storage cradle with welded on staging brackets and planks that are adjustable to 3 positions.
19. New Sailcover.
20. Engine. - electronic ignition, electric fuel pump A) New aftermarket water pump (Moyer Marine) B) New Shift cable, choke cable, and bracket. C) New Fuel lines. D) New Batteries.
21. New Electric Bilge Pump.
22. Rebuilt manual Bilge Pump.

- Deck, Original Gelcoat

- Topsides, Original Gelcoat

- Bottom, Interlux 2000 barrier coat, Bottomkote

Custom steel cradle with adjustable scaffolding feature will save you time year after year getting the boat ready for water.