Hull & Deck
• Balsa core/biaxial e-glass vacuum infused hull laminate and Corecell/biaxial e-glass deck laminate. All laminates engineered and built to current ISO and ABS structural standards.
• White gel coat hull with single bootstripe.
• Molded companionway slide-in seahood.
• ORC size molded foredeck toe-rails.
• GRP molded main structural bulkhead, bonded fore & aft on hull and deck with single opening to forepeak.
• Fore/aft and transverse keel support beams.
• Composite mast bearing beam with integral aluminum tapping plate to secure mast step.
• High aspect two-metal racing keel with lead bulb and stainless fin, flange mounted to a hull recess.
Mechanical & Steering• Yanmar 3YM20 3 cylinder 4-stroke 21hp diesel engine with 60 amp alternator and SD 20 saildrive with 2-piece split zinc.
• Yanmar digital B-type engine instrument panel mounted in recess on cockpit wall near wheel with acrylic splash shield.
• 16” diameter geared folding prop.
• Engine throttle control with neutral safety switch.
• Balanced spade rudder constructed using “E-glass” with custom carbon rudder shaft mounted in Jefa self aligning rudder bearing system.
• Edson 60” destroyer wheel with leather cover recessed in molded cockpit wheel well.
• Edson steering system including Articu-lock sheaves, 6.5” radial drive, needle bearing with integral wheel brake, and chain/wire cables.
• Jefa emergency tiller.
Deck Hardware• 46:1 Harken Radial self-tailing primary winches.
• 40:1 Harken Radial self-tailing cabintop winches.
• (2) 10” aluminum winch handles.
• Two winch handle holders.
• Two-speed Harken Mainsheet System with 6:1 rough tune purchase to swivel cam base & 24:1 fine tune purchase led to centerline ratchet cam.
• 4:1 Harken Traveler System – led P&S.
• 4:1 Harken Adjustable Jib Lead System.
• Jib in-hauler hardware P&S.
• Cunningham system.
• Harken 57mm spinnaker sheet and bow-sprit blocks.
• Harken bow-sprit control system led internally to cockpit mounted cam cleat.
• Harken mast base halyard blocks and organizers.
• Spinlock XTS halyard & tack line rope clutches.
• (2) Spinlock ZR Jammers for main and jib halyards.
• Custom SS mast collar plate with pins for halyard blocks and halyard bale.
• Stainless cabin top handrails P&S.
• Tapered lifeline stanchions mounted to hull to deck joint.
• Double lifelines to meet ORC offshore regulations with 9” lower lifeline height.
• Custom bow pulpit and dual corner stern rails.
• Four 4-bolt mooring cleats.
• (2) U-bolts and (2) fold-over padeyes for cockpit spinnaker blocks.
• Interior ventilation from two framed opening ports in sides of cabin trunk and offshore style forward skylight deck hatch above V-berth (option for two opening ports on aft cabin face).
• Acrylic offshore drop-board with inside/outside removable hasp.
• Cockpit operated manual bilge pump.
• Three 12"x 20" polypropylene mesh line bags.
• Custom SS stemhead, shroud and backstay chainplates.
Plumbing & Electrical• 15-gallon fuel tank with baffles and inspection/clean out port.
• 12-gallon head holding tank.
• Raritan PH-II head with Y valve and deck pump-out access.
• 26-gallon water tank.
• Manual fresh water foot pumps in head and galley.
• 90 amp deep-cycle, sealed AGM battery.
• Three position battery switch.
• Electrical panel w/circuit breakers.
• Aquasignal LED Navigation lights to meet COLREGS.
• Bonding system.
• Six reading lights.
• One adjustable nav light.
• Two red/white LED dome lights
• One fluorescent light in head.
• Automatic bilge pump w/check valve & panel switch for manual/auto operation.
Spars & Rigging• Hall Spars 152c autoclaved carbon fiber mast with double set of tapered aluminum spreaders, backstay crane, flush shroud terminations, sheaves for main, 2 jib & 2 spinnaker halyards, vang and boom gooseneck fittings, steaming light, internal wiring conduit, pre-formed mast wedge kit. Mast/boom finished in black with contrasting white measurement bands. White finish optional.
• Alloy 6061-T6 Boom with 12:1 internal outhaul, two mainsheet block bales, vang lug, three sheaves for reef lines and outhaul.
• Nitronic discontinuous rod standing rigging package including shrouds and forestay.
• Ronstan calibrated shroud turnbuckles.
• Dyneema DSK-78 Backstay.
• Remote Sailtec hydraulic backstay system mounted within reach of helmsman or crew on front face of wheel pedestal.
• Low-profile Facnor “Flat” headsail furling system with control line aft to port side of cabin trunk.
• Carbon fiber, retractable bow sprit with internal bearing system with white painted finish.
• Running rigging package w/Crystalyne Vectran Main & Jib Halyards with Tylaska shackles, Endura Braid Dyneema core jib & main sheets. DSK 75 tapered spin halyard, Maxibraid tapered spin sheets with T-8 shackle. Also includes reef line, cunningham, pole control, tack line, inhauler lines, traveler control lines and mainsheet fine tune.
• Hall Quikvang with integral cleating.
Interior• Off-white low-maintenance bulkheads with varnished wood trim and accents.
• Molded engine box cover with 1” sound insulation.
• SS Companionway ladder w/teak steps
• Twin 6’9” quarter berths aft of the galley/nav area with storage below.
• Main bulkhead privacy door.
• Teak and holly style synthetic high-wear cabin flooring.
• 6’4” settee berths with backrests (fold-up pilots optional).
• Shelf outboard of settee berths with storage behind backrest cushions.
• Nav Station/Office with full leg room, hinged-lid access to chart storage, outboard instrument panel and storage bin.
• L-Galley with sink, faucet, fresh water foot pump, sink drain seacock, ice box with top opening, and storage cabinet outboard.
• Head compartment with sink and outboard storage to port and large sail/tool storage bin to starboard.
• Choice of nylon fabrics for interior cushions.
Factory OptionsPort & Starboard Lifeline Gates
Two Opening Ports in Aft Face of Cabin
Fiberglass Storage Inserts
Second 12V Battery
Spare Keel Fairing Plate
Dealer-Supplied Options & ServicesS.S. VHF Antenna on Masthead with coax run to nav station
Windex mounted on Masthead Tang
Custom Made Painted Steel Cradle
Anti-Fouling VC 17 Bottom Paint
Steel Cradle
Dacron Winter Cover with Metal Framework
Icebox Drain into bilge
T-Track on Mast
ElectronicsTacktick Wind, Depth, Speed sensors
3 Tacktick T110 Displays mounted in Navpod bracket on mast
2 Tacktick T111 Dual Displays mounted port and starboard at helm
Tacktick T122 NMEA interface
Tacktick T909 Compass
Standard Horizon Quest Radio
Standard Horizon RAM 3 Remote mic
Garmin GPS Map at navigation station
Mariner Pro Sport battery charger
Sail InventoryDoyle 2011 Technora/carbon class mainsail
Doyle 2011 Technora/carbon #1 jib
Doyle 2011 Technora/carbon $3 jib
Doyle 2011 131 SQM Airx runner
Doyle 2011 110 SQM Airx reacher
Doyle 2011 Heavy Kevlar #4 jib (used 3 times)
Doyle 2011 Code 0 spinnaker (lightly used)
Doyle 2014 Kevlar full cut light #1 jib (lightly used)
Mainsail Cover
Jib Sock
DisclaimerThe Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
customContactInformationContact RCR listing broker Charles âCorboâ? Corbishley for more information or to arrange a viewing; O: 585-339-9730, C: 585-752-2530, corbo@rcryachts.com
Email
Facebook
On LinkedIn
To Pinterest
Your Followers