23' J Boats J/70 J70 J 70 J-70 Racers

J/70 Specifications

• Construction J/70 hull laminated with biaxial and unidirectional E-glass fabrics and balsa core for rugged durability.
• Deck molded with similar glass fabrics and Corecell foam core.
• High density core material and additional glass reinforcements are placed in way of highly loaded hardware.
• All laminates are engineered and built to required ISO structural standards.
• Molded internal bulkheads and ring frames with gelcoat finish, bonded to the hull and/or deck.
• Molded lift-keel structure jigged, aligned and integrally molded during primary hull layup.
• High strength, inward turning and overlapping hull to deck joint bonded with structural adhesive.
• Molded non-skid on horizontal deck surfaces.
• 4.75’ draft lifting keel with lead ballast featuring an internal leading-edge kelp cutting mechanism operable from the cockpit while underway, SS lock down plate and a single point lifting ring w/2:1 aluminum keel crane lift system.
• (2) Harken investment cast diamond boat lift padeyes installed adjacent to keel P&S.
• High aspect transom mounted molded rudder.
• Lightweight aluminum outboard bracket mounted to transom.
• Deck Large self-draining cockpit with molded foot braces on centerline.
• Molded companionway cover both hinged & removable with lockable drop board.
• Molded foredeck toe-rails P & S. SS custom fabricated chain plates for shrouds and backstay terminations.
• Interior ventilation hatch mounted on cabin house forward of mast.
• (2) Harken B8 primary winches with cam cleats and 8� winch handle.
• Two Ronstan black anodized jib T tracks with cars to accommodate 2:1 jib sheet terminations.
• 5:1 Harken mainsheet system leading to ratchet block and cam mounted on centerline swivel base.
• Adjustable mainsheet traveler with 2:1 control line and cam cleats P & S.
• Double ended backstay adjuster purchase system leading forward to P & S cam cleats.
• Internal bowsprit launching system to exit aft face of the cabin house to cam cleat.
• Harken Small Boat Underdeck headsail furling system with hoistable swivel and control line exiting aft face of cabin house to cam cleat.
• Tack line cam cleat mounted to starboard on cabin.
• Composite tiller with Ronstan tiller extension.
• (4) Spinnaker sheet blocks with (2) outboard of primary winches and (2) aft.
• (2) halyard lead blocks mounted at mast base.
• Four low height SS stanchions and two reinforced SS stern rails at transom corners.
• Stainless Steel lifelines surrounding the cockpit with comfort pads and termination points on deck edge forward of shrouds.
• Dyneema transom lifeline gate with quick release Foredeck U-bolt for mooring/dockline attachment.
• Spars & Rigging Southern Spars carbon fiber mast with single swept carbon spreaders, carbon masthead crane and mainsail luff track.
• Easy to raise and lower with deck step design and tabernacle system.
• Mast finished in satin black with contrasting white bands.
• Carbon fiber boom with internal 4:1 outhaul, mainsheet attachment point, outhaul and single reef sheaves as well as provision for reef cleat and block at inboard end. Finished in satin black with contrasting white bands.
• Carbon bow sprit with tack ferrule fitting, painted black finish and seal system mounted at sprit housing. 1 x 19 wire standing rigging with adjustable Ronstan turnbuckles for shrouds.
• Double ended boom vang system.
• Running Rigging Package to include: Main, jib & spinnaker halyards Main sheet, spinnaker sheets, jib sheets 18� main sheet strop Tack line, sprit control line Vang control line Traveler control lines Cunningham Dyneema Bow bridal for trailer loading
• Interior Air dry gelcoat finish on hull & deck surfaces Removable cabin floor (2) Bench style molded seats P & S.
• Bin storage aft of seats.
• Molded liner platform with inspection port.
• Molded cockpit support bulkhead with inspection port.
• Anodized aluminum compression post to transfer mast step loads to internal hull structure. Molded entry step.

• Factory installed corrector weights to bring boat to approximately 10 pounds of desired minimum. Corrected weight allows for normal motor and add-ons. Boats still need final weighing and certification after owner takes delivery, this is intended to get the boat close.
• Cunningham on starboard side swivel block same as jib and spin halyards
• Spin halyard block upgraded to #150 to minimize slip
• Main halyard horn cleat moved to starboard side of mast
• Jib halyard fine tune lower block is now fixed to side of mast, not floating
• Jib clew blocks are now supplied as standard

Pack & Prep for factory pick-up, includes hull & keel ratchet
Straps, wood mast support, etc.

All Options below at RCR’s Net Cost:
Initial Set-up by RCR: includes assembly, 10" Windex,
Backstay Flicker, Shockcord Shroud Spin Net

Spare Tire & Mount
LED Light Package, fully submersible
Rear Stabilizing Jack
Extendable Tongue for Trailer with Brakes
SS Disc Brakes
Upgraded Tongue Jack

North Triradial Class Mainsail
North Triradial Class Genoa
North Asymmetrical Spinnaker

Torqeedo Travel 1003 Electric Motor
Velocitek Prostart with Mast Mount, installed

Loose Gear Pack: Docklines, Fenders, Fortress Anchor & Rode,
First Aid Kit, Throw Cushion, Fire Extinguisher, 4 Pack LJs,
Flare Kit, Tape, Plastic Tub

Contact Tracy Buczak CPYB, tracy@rcryachts.com, 814-455-6800, 716-680-4554 cell, 960 West Bayfront Parkway, Erie, PA 16507